| Content | | The Libec LX10 Two-Stage Aluminum Tripod System and H65B Head and Ground-Level Spreader supports cameras and accessories weighing up to 11 pounds. The head and legs feature a 100mm ball/bowl, which provides a wide platform for stable shots.The legs are made from aluminum and feature three leg sections. The head and legs come with a ground-level spreader, and the system is height-adjustable from 25 to 68.5". To aid in leveling your shot, a bubble level is incorporated into the head.The head also features a sliding baseplate that allows you to adjust the balance of your camera. It provides fixed counterbalance that helps the fluid head support loads up to 35 pounds. With individual fluid drag adjustments for both pan and tilt, you can adjust the fluid head to suit your shooting style or the needs of the shot.Libec LX10 Two-Stage Aluminum Tripod System
The head features discreet pan and tilt locks. And also the removable pan handle can attached to either side of the head by via the built-in rosettes.The sliding balance plate features a total of four inches of balance adjustment . Two inches forward and two inches back of center. This does not take into account the integrated balance slot that allows you to adjust the position of the captive camera tie-down screw.The head incorporates a small stud at the front that prevents the balance plate from sliding out. The included ground-level spreader prevents the tripod's legs from flying apart and is suitable for use on flat, level surfaces. | The Libec ALX S8 is a 32.6" long camera slider that features an integrated 75mm ball base with a flat bottom, allowing it to be mounted directly to 75mm bowl fluid heads as well as flat-base heads. When used on tabletop or flat surface using, the slider has a maximum load capacity of 33 lb.For smooth and wobble-free operation, the carriage features eight roller bearings positioned on the rail top and along the sides at angles. A spring-loaded friction knob allows you to adjust slide tension, while a brake knob will lock the carriage in place at any point on the rails. Using a supplied hexagon wrench, you can adjust the pushing force that the ball bearing exerts on the rail.At each end of the slider, there are 1/4"-20 and 3/8"-16 threads and a rosette for attaching various accessories. If you will be using the slider on the ground or tabletop, the slider features built-in legs with height-adjustable feet to accommodate non-level terrain.For compact storage, the legs fold up against the side of the slider, securing in place using thumb knobs. Unscrewing the knobs completely allows you to detach the legs completely and swap out the 32.6" rail for separately available 15.5" or 47" rail lengths.Key Features- 28" slide range with a 33 lb payload
- 33 lb load capacity when used on a tabletop or flat surface
- Dual-base tripod mount adapter and bowl clamp for mounting on a tripod with a flat-base or 75mm ball head
- Eight high-performance ball bearings on the top and sides allow for smooth, wobble-free motion
- Tension/friction knob, brake knob, and bubble level
- 32.6" rail can be swapped for optional 15.5" or 47" rail lengths
- Collapsible tabletop legs for easy setup and storage
- Height-adjustable feet
- Includes padded carrying case with fixing handle and maintenance kit
| 9 Alternative Camera Supports
The Libec Hands-Free Monopod Kit includes a TH-X pan-and-tilt video head and bowl clamp, as well as a monopod with a tripod base. Together, the video head, monopod, and tripod base combine to create a complete, versatile, and easy-to-use support system for recording with a video camera, camcorder, or DSLR.A flat-base, true-fluid head, the TH-X pan-and-tilt video head is compatible with tripods or support systems that feature a 3/8"-16 mount. It offers a +90 ?/-80 ? tilt angle, a 360 ? pan angle, a fixed counterbalance and drag mode, plus an interchangeable pan bar with a rubber grip.Both the pan and tilt movements can each be locked into place and the head's camera plate has a 30mm sliding range. For adaptability to video tripods that utilize a 65mm bowl, the TH-X Bowl Clamp connects to the bottom of the video head using its 3/8"-16 mount.The tripod base connects to the bottom of the monopod and features fold-out legs that when deployed, produces a 17.3" spread, forming a stable, free-standing platform. This platform allows the monopod and the camera used with it to swivel 360 ? independently of the video head and be tilted 20 ? in any direction. A foot-activated latch is positioned between the legs and the bottom of the monopod.Pressing and releasing the latch unlocks it, enabling the swivel and also tilt movements for smooth angle or perspective adjustments. After recording a subject at a desired angle while gripping the monopod as well as the attached video head. The monopod can returned to the upright position and also locked into place by again pressing and releasing the latch.Libec Hands-Free Monopod Kit
When configured with its video head and tripod base. The Libec Hands-Free Monopod Kit supports up to 9 lb and measures 34.3" when folded. The monopod consists of three sections which utilize flip locks for fast deployment. And also with the video head, can positioned for a minimum height of 34.4" to a maximum height of 74.6".A rubber cover along the top section provides a secure and also comfortable grip while moving the monopod. And also rubber feet on the base's legs help to enhance stability on a wide variety of surfaces.Tripod or monopod heads, as well as cameras, lenses, or also sport optics that are directly compatible. With a 3/8"-16 mount can connected to the top of this kit's monopod.It is constructed from aluminum-alloy for durability while remaining lightweight, has an integrated wrist strap. And also a shoulder bag with a drawstring closure that can accommodate the entire. Libec Hands-Free Monopod Kit is included for storage and transport.Use and Handling- Included video head, monopod, and tripod base combine to create a complete, versatile, and easy-to-use support system for recording with a video camera, camcorder, or DSLR
- Video head offers a +90 ?/-80 ? tilt angle, a 360 ? pan angle, a fixed counterbalance and drag mode, plus an interchangeable pan bar with a rubber grip
- Pan and tilt movements on video head can each be locked into place
- Camera plate for video head has a 30mm sliding range
- Bowl clamp connects to the bottom of the video head to provide adaptability to video tripods that utilize a 65mm bowl
- When deployed, fold-out legs on the tripod base produce a 17.3" spread, forming a stable, free-standing platform that allows the monopod to swivel 360 ? and be tilted 20 ? in any direction
- Foot-activated latch positioned between the legs and the bottom of the monopod enables swivel and tilt movements
- After recording at an angle, monopod can be returned to the upright position and locked into place
- When combined, video head, monopod and base supports up to 9 lb, measures 34.3" when folded, and weighs 5.9 lb
- Individually, monopod and base measure 24.5" and 8.4" when folded
- Video head, monopod and base can be set for a minimum height of 34.4" to a maximum height of 74.6"
- Monopod features 3 sections and flip locks for fast deployment
- Rubber cover on top section of monopod provides a secure and comfortable grip
- Rubber feet on base help to enhance stability on a wide variety of surfaces
Construction Details- Flat-base, true-fluid video head is compatible with tripods or support systems that feature a 3/8"-16 mount
- Video head features an operating temperature range of -4 ?F to 140 ?F
- Monopod is constructed from aluminum-alloy for durability while remaining lightweight
- 3/8"-16 mount
- Integrated monopod wrist strap
- Includes nylon carry bag with drawstring closure and shoulder strap
| This Clamp Handle for Swift Jib50 Weight Bar from Libec is an accessory for the Swift Jib50 which assures smooth operation from the rear of the Swift Jib50. The clamp handle is clamped to the Swift Jib50's weight bar and a remote control (not included) can be attached to the handle. | The 650EX Tripod System with Mid-Level Spreader from Libec features dual-stage tripod legs and a 65mm half ball video head. It supports up to 6.6 lb via a fixed counterbalance system and offers a 27.8 to 59.3" height range. The tripod legs have flip locks and retractable rubber feet with spikes underneath for use on both flat surfaces and soft ground. A removable mid-level spreader is included for additional stability.The fluid head features independent pan and tilt locks, a Manfrotto and Sachtler compatible sliding camera plate, and a bubble level. The 650EX tripod system comes with a soft carrying bag.Key Features- 6.6 lb payload
- 228 to 63.5" height range
- Dual-stage legs with 65mm bowl base
- 65mm half ball fluid head
- Fixed counterbalance
- Independent pan and tilt locks
- Sliding camera plate
- Retractable rubber feet with spikes
- Mid-level spreader
- Bubble level
|
