Description | Key features- Libec Broadcast CamBag 30 Camera Bag
| Key features- Supports 35 Pounds
- Sliding Balance Plate with Safety Stop
- Fixed Counterbalance System
- Two-Step Pan and Tilt Drag System
| Key features- Roller Bearing Sliding System
- 33 lb Load Capacity on Flat Surfaces
- 43.5" Travel Distance
- 47" Total Track Length
| Key features- Supports 35 Pounds
- Sliding Balance Plate with Safety Stop
- Fixed Counterbalance System
- Two-Step Pan and Tilt Drag System
| Key features- The Libec AD75 adapter is for 75mm Libec fluid heads when used with 100mm Libec tripods.
| Key features- The Libec CR-90 Curved Track Rail with Case set is a lightweight aluminum track set that sets up quickly and easily.
|
Content | | The Libec LX10 Studio Two-Stage Aluminum Tripod System and H65B Head with Dual Pan Handles and Spreader Dolly supports cameras and accessories weighing up to 11 pounds. The head and legs feature a 100mm ball/bowl, which provides a wide platform for stable shots.The legs are made from aluminum and feature three leg sections. The head and legs come with a spreader dolly, and the system is height-adjustable from 36 to 73.5". To aid in leveling your shot, a bubble level is incorporated into the head.The head also features a sliding baseplate that allows you to adjust the balance of your camera. It provides fixed counterbalance that helps the fluid head support loads up to 35 pounds. With individual fluid drag adjustments for both pan and tilt, you can adjust the fluid head to suit your shooting style or the needs of the shot.The head features discreet pan and tilt locks, and the removable pan handle can be attached to either side of the head by via the built-in rosettes.Libec LX10 Studio Two-Stage Aluminum Tripod System
The sliding balance plate features a total of four inches of balance adjustment. Two inches forward and also two inches back of center. This does not take into account the integrated balance slot. That allows you to adjust the position of the captive camera tie-down screw.The head incorporates a small stud at the front that prevents the balance plate from sliding out. The included spreader dolly secures your tripod's legs. But allows you to roll your tripod from one point to another on a smooth surface. It can used during a shot, but it is not as smooth as a true dolly. | The Libec ALX S12 is a 47" long camera slider that features two integrated 75mm ball bases with flat bottoms, allowing it to be supported by a pair of 75mm bowl fluid heads as well as flat-base heads. When used on tabletop or flat surface using, the slider has a maximum load capacity of 33 lb.For smooth and wobble-free operation, the carriage features eight roller bearings positioned on the rail top and along the sides at angles. A spring-loaded friction knob allows you to adjust slide tension, while a brake knob will lock the carriage in place at any point on the rails. Using a supplied hexagon wrench, you can adjust the pushing force that the ball bearing exerts on the rail.At each end of the slider, there are 1/4"-20 and 3/8"-16 threads and a rosette for attaching various accessories. If you will be using the slider on the ground or tabletop, the slider features built-in legs with height-adjustable feet to accommodate non-level terrain.For compact storage, the legs fold up against the side of the slider, securing in place using thumb knobs. Unscrewing the knobs completely allows you to detach the legs completely and swap out the 47" rail for separately available 15.5" or 32.6" rail lengths.Key Features- 43.5" slide range with a 33 lb payload
- 33 lb load capacity when used on a tabletop or flat surface
- Dual-base tripod mount adapter and bowl clamps for supporting slider using two tripods with either flat-base or 75mm ball heads
- Eight high-performance ball bearings on the top and sides allow for smooth, wobble-free motion
- Tension/friction knob, brake knob, and bubble level
- 47" rail can be swapped for optional 15.5" or 32.6" rail lengths
- Collapsible tabletop legs for easy setup and storage
- Height-adjustable feet
- Includes padded carrying case with fixing handle and maintenance kit
| The Libec LX10 Two-Stage Aluminum Tripod System and H65B Head and Ground-Level Spreader supports cameras and accessories weighing up to 11 pounds. The head and legs feature a 100mm ball/bowl, which provides a wide platform for stable shots.The legs are made from aluminum and feature three leg sections. The head and legs come with a ground-level spreader, and the system is height-adjustable from 25 to 68.5". To aid in leveling your shot, a bubble level is incorporated into the head.The head also features a sliding baseplate that allows you to adjust the balance of your camera. It provides fixed counterbalance that helps the fluid head support loads up to 35 pounds. With individual fluid drag adjustments for both pan and tilt, you can adjust the fluid head to suit your shooting style or the needs of the shot.Libec LX10 Two-Stage Aluminum Tripod System
The head features discreet pan and tilt locks. And also the removable pan handle can attached to either side of the head by via the built-in rosettes.The sliding balance plate features a total of four inches of balance adjustment . Two inches forward and two inches back of center. This does not take into account the integrated balance slot that allows you to adjust the position of the captive camera tie-down screw.The head incorporates a small stud at the front that prevents the balance plate from sliding out. The included ground-level spreader prevents the tripod's legs from flying apart and is suitable for use on flat, level surfaces. | The Libec AD75 adapter is for 75mm Libec fluid heads when used with 100mm Libec tripods. The Libec AD75 Adapter is a versatile solution designed to enhance the compatibility and stability of your videography setup. This adapter seamlessly bridges the gap between 75mm heads and 100mm tripods, allowing for a flexible and secure connection.Whether you're working with different tripod systems or adapting your existing equipment, the AD75 ensures a reliable and efficient solution. Its robust construction and precision engineering guarantee stability during shoots, providing videographers with confidence in their equipment.With the AD75 Adapter, you can effortlessly achieve a seamless integration between 75mm heads and 100mm tripods, unlocking new possibilities for your creative projects and ensuring a professional and hassle-free shooting experience. Upgrade your videography toolkit with this essential accessory for enhanced versatility and precision in your workflow. | The Libec CR-90 Curved Track Rail with Case set is a lightweight aluminum track set that sets up quickly and easily. This set completes a 90 degree turn, and interfaces perfectly with the Libec track system. |