| Description | Key features- Libec Broadcast CamBag 30 Camera Bag
| Key features- Supports 35 Pounds
- Sliding Balance Plate with Safety Stop
- Fixed Counterbalance System
- Two-Step Pan and Tilt Drag System
| Key features- Roller Bearing Sliding System
- 33 lb Load Capacity on Flat Surfaces
- 28" Travel Distance
- 32.6" Total Track Length
| Key features- For Fujinon Broadcast Lenses, ZC-9Pro, ZC-9EX
| Key features- Roller Bearing Sliding System
- 33 lb Load Capacity on Flat Surfaces
- 43.5" Travel Distance
- 47" Total Track Length
| Key features- 6.6 lb Capacity 65mm Half Ball Head
- Sliding Plate with 1/4"-20 Screw & Pin
- 27.8 to 59.3" Height Range
- Dual-Stage Legs with 65mm Bowl
|
| Content | | The Libec LX10 Two-Stage Aluminum Tripod System and H65B Head and Ground-Level Spreader supports cameras and accessories weighing up to 11 pounds. The head and legs feature a 100mm ball/bowl, which provides a wide platform for stable shots.The legs are made from aluminum and feature three leg sections. The head and legs come with a ground-level spreader, and the system is height-adjustable from 25 to 68.5". To aid in leveling your shot, a bubble level is incorporated into the head.The head also features a sliding baseplate that allows you to adjust the balance of your camera. It provides fixed counterbalance that helps the fluid head support loads up to 35 pounds. With individual fluid drag adjustments for both pan and tilt, you can adjust the fluid head to suit your shooting style or the needs of the shot.Libec LX10 Two-Stage Aluminum Tripod System
The head features discreet pan and tilt locks. And also the removable pan handle can attached to either side of the head by via the built-in rosettes.The sliding balance plate features a total of four inches of balance adjustment . Two inches forward and two inches back of center. This does not take into account the integrated balance slot that allows you to adjust the position of the captive camera tie-down screw.The head incorporates a small stud at the front that prevents the balance plate from sliding out. The included ground-level spreader prevents the tripod's legs from flying apart and is suitable for use on flat, level surfaces. | The Libec ALX S8 is a 32.6" long camera slider that features an integrated 75mm ball base with a flat bottom, allowing it to be mounted directly to 75mm bowl fluid heads as well as flat-base heads. When used on tabletop or flat surface using, the slider has a maximum load capacity of 33 lb.For smooth and wobble-free operation, the carriage features eight roller bearings positioned on the rail top and along the sides at angles. A spring-loaded friction knob allows you to adjust slide tension, while a brake knob will lock the carriage in place at any point on the rails. Using a supplied hexagon wrench, you can adjust the pushing force that the ball bearing exerts on the rail.At each end of the slider, there are 1/4"-20 and 3/8"-16 threads and a rosette for attaching various accessories. If you will be using the slider on the ground or tabletop, the slider features built-in legs with height-adjustable feet to accommodate non-level terrain.For compact storage, the legs fold up against the side of the slider, securing in place using thumb knobs. Unscrewing the knobs completely allows you to detach the legs completely and swap out the 32.6" rail for separately available 15.5" or 47" rail lengths.Key Features- 28" slide range with a 33 lb payload
- 33 lb load capacity when used on a tabletop or flat surface
- Dual-base tripod mount adapter and bowl clamp for mounting on a tripod with a flat-base or 75mm ball head
- Eight high-performance ball bearings on the top and sides allow for smooth, wobble-free motion
- Tension/friction knob, brake knob, and bubble level
- 32.6" rail can be swapped for optional 15.5" or 47" rail lengths
- Collapsible tabletop legs for easy setup and storage
- Height-adjustable feet
- Includes padded carrying case with fixing handle and maintenance kit
| The Libec A12P 12-pin Adapter Cable is an 8-pin to 12-pin adapter that adapts the Libec PH-9 remote control handle to Fujinon broadcast lenses with a 12-pin connector. | The Libec ALX S12 is a 47" long camera slider that features two integrated 75mm ball bases with flat bottoms, allowing it to be supported by a pair of 75mm bowl fluid heads as well as flat-base heads. When used on tabletop or flat surface using, the slider has a maximum load capacity of 33 lb.For smooth and wobble-free operation, the carriage features eight roller bearings positioned on the rail top and along the sides at angles. A spring-loaded friction knob allows you to adjust slide tension, while a brake knob will lock the carriage in place at any point on the rails. Using a supplied hexagon wrench, you can adjust the pushing force that the ball bearing exerts on the rail.At each end of the slider, there are 1/4"-20 and 3/8"-16 threads and a rosette for attaching various accessories. If you will be using the slider on the ground or tabletop, the slider features built-in legs with height-adjustable feet to accommodate non-level terrain.For compact storage, the legs fold up against the side of the slider, securing in place using thumb knobs. Unscrewing the knobs completely allows you to detach the legs completely and swap out the 47" rail for separately available 15.5" or 32.6" rail lengths.Key Features- 43.5" slide range with a 33 lb payload
- 33 lb load capacity when used on a tabletop or flat surface
- Dual-base tripod mount adapter and bowl clamps for supporting slider using two tripods with either flat-base or 75mm ball heads
- Eight high-performance ball bearings on the top and sides allow for smooth, wobble-free motion
- Tension/friction knob, brake knob, and bubble level
- 47" rail can be swapped for optional 15.5" or 32.6" rail lengths
- Collapsible tabletop legs for easy setup and storage
- Height-adjustable feet
- Includes padded carrying case with fixing handle and maintenance kit
| The 650EX Tripod System with Mid-Level Spreader from Libec features dual-stage tripod legs and a 65mm half ball video head. It supports up to 6.6 lb via a fixed counterbalance system and offers a 27.8 to 59.3" height range. The tripod legs have flip locks and retractable rubber feet with spikes underneath for use on both flat surfaces and soft ground. A removable mid-level spreader is included for additional stability.The fluid head features independent pan and tilt locks, a Manfrotto and Sachtler compatible sliding camera plate, and a bubble level. The 650EX tripod system comes with a soft carrying bag.Key Features- 6.6 lb payload
- 228 to 63.5" height range
- Dual-stage legs with 65mm bowl base
- 65mm half ball fluid head
- Fixed counterbalance
- Independent pan and tilt locks
- Sliding camera plate
- Retractable rubber feet with spikes
- Mid-level spreader
- Bubble level
|
