| Description | - Portable Multi-Function Tripod
- Load Capacity: 6.6 lb
- Universal Mobile Phone Clip
- Three-Section Carbon Fiber Legs
| - Load Capacity: 44 lb
- Maximum Height: 126"
- Minimum Height: 53", 3 x Sections
- 40" Arm with Grip Head
| - Wireless Programmable 3-Axis Slider
- Mobile App Control
- Carbon Fiber Rails
- Supports up to 11 lb
| - 30" Quiet Motorized Sliding Range
- Supports Cameras up to 30 Pounds
- Programmable Shooting Modes
- Straight, Parallax, or 120 ? Panning
| - Wireless Programmable Motorized Slider
- Robust 31" Portable Travel Slider
- Carbon Fiber Rails
- Supports up to 5.5 Pounds
| - 2 x GVM-672S LED Panels
- 2 x Bracket Soft Filters
- 2 x Soft Filters
- Built-In Wireless Control
|
| Content | The JJ-G265 Carbon Fiber Mini Tabletop Tripod from GVM is a portable multi-function tripod with a folded length of 10.4" and a 6.6 lb load capacity. Perfect for travel, this tripod features a dual-action ball head with an independent pan lock that enables you to rotate the head 360 ?, and a ball lock lets you vertically position your camera at a 90 ? angle.The GVM JJ-G265 Carbon Fiber Mini Tabletop Tripod includes a cell-phone clip for accepting phones up to 3.3" wide, and a WD1 Magic Hand is also included, which provides a multi-function arm with 1/4"-20 interfaces at both ends. Three-section carbon fiber legs with twist locks extend the tripod to a height of 15.5".And the included telescoping pole increases the maximum working height of the tripod to 28.3". Removable rubber feet are provided for working on smooth surfaces, and these removable feet enable you to use the included spiked feet when shooting outdoors and on uneven terrain.UPC: 717351605432 | The ?10.5' ?GVM C330 Turtle-Base C-Stand & Grip Arm Kit is used for mounting lighting equipment and a variety of light-shaping tools and accessories. Constructed from stainless steel, the stand employs two risers and three sections that fully extend to a height of 126".The GVM C330 Turtle-Base C-Stand & Grip Arm Kit turtle base detaches completely from the riser. The base has wide C-type legs with a stable footprint of 27.6" that accommodates easy sandbagging and straddling of obstacles as well as folding flat.The stand has a 5/8" stud for lights or other gear. It comes with a 40" grip arm as well as a separate grip head that allows the clamped arm to travel anywhere along its length for positioning modifiers such as silks, flags, and scrims. | The 32" ?GVM 3D 3-Axis Wireless Carbon Fiber Motorized Slider with Bluetooth Remote is a 3-axis motorized slider (track slide, pan, and tilt) that you can program and control remotely using the included Bluetooth remote controller. The motorized slider features carbon fiber rails and is belt-driven, which delivers a smooth sliding action along the 31" of travel.The GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized slider carriage has a built-in bubble level so you can check that your setup is level, and built-in independently adjustable feet allow you to adjust its position and level. An included motorized pan base mounts onto the slider carriage providing 360 ? of pan and tilt. The slider has a load capacity of 11 lb when horizontal.GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized Slider The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as time-lapse, with multiple keyframed positions per move. The motorized slider powers from an included AC power supply or you can use two NP-F750-type batteries for approximately 10 hours of power.You can hot-swap batteries during the slider move for increased runtime. Six included camera control cables allow the system to trigger your camera for time-lapse. The remote features an integrated display and can be turned off during time-lapse moves to preserve battery power.Camera Control Cables
Included with the system are six shutter cables that allow limited control, such as shutter trigger, of your camera from the system. The cameras you can control include:- DC2: Nikon D7100/D7000/D5300/D5100/D5000/D3200/D3100/D610/D600/D90/DF
- N3: Canon EOS 7D/5D-series/1D/6D/50D/40D/30D/20D
- S2: Sony NEX-3NL/a7/a7R/a6000/a5000/a3000
- L1: Panasonic DMC-FZ50K/DMC-FZ150D/DMC-FZ30K/DMC-FZ20/DMC-FZ20K/DMC-FZ20S/DMC-FZ200/LC-1/L1/L10/G10/G2/G1/GF1/GH2/GX1/G5/DIGILUX2/DIGILUX3
- DC0: Nikon D850/D810/D800E/D800/D700?D300s/D200/D5/D4/D3/DF/D1/F90/F90X/F100
Remote Controller
The GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized Slider wireless controller features an internal battery. And an integrated display screen that shows slider battery power remaining. Remote controller battery power remaining, Bluetooth signal strength. And also info on your move. The remote controller allows you to set keyframes and control the duration of the moveRemote Control
You can use the remote to control the slider in manual video mode. As well as in auto mode for video, auto loop, time-lapse, and panoramic stills shooting- The slider can traverse the 31" sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
- In time-lapse, the speed range is 114 seconds to 22 minutes, and 30 seconds at its slowest
The pan and tilt axis each features 360 ? of rotation | The 32" ?GVM Professional Video Aluminum Alloy Motorized Camera Slider ?features a 30-pound load capacity as well as a 30" slider range, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode.The GVM GT-J80D Professional Video Aluminum Alloy Motorized Camera rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120 ? panoramic camera move.The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting.The GVM GT-J80D Professional Video Aluminum Alloy Motorized Camera slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. Six different camera control cables are include allowing the slider controller to interface with most cameras.Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the end points of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.Orientation
GVM GT-J80D Professional Video Aluminum Alloy Motorized Camera Adjusting the channel between the support rails. Allows you to adjust the position of your head on the slider as it moves between the ends of the slider track.The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject center during the move. Also it pans the camera up to 120 ? to create a panoramic shot.Camera Compatibility
The GVM GT-J80D Professional Video Aluminum Alloy Motorized Camera slider. Includes six cables that enable the controller to interface with a variety of cameras from Canon. Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.UPC: 682141383848 | The GVM GT-80WD Wireless Carbon Fiber Motorized Camera Slider (31") with Bluetooth Remote is a motorized slider that you can program and control remotely using the included Bluetooth remote controller or a downloadable app. The motorized slider features carbon fiber rails and is belt driven, which delivers a smooth sliding action along the 31" of slider travel.The GVM GT-80WD Wireless Carbon Fiber carriage has a built-in bubble level so you can check that your setup is level. Built-in independently adjustable feet allow you to adjust the slider's position and level. The slider has a load capacity of 5.5 pounds when horizontal.The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as timelapse, with multiple key framed positions per move. The motorized slider powers from a single GVM GT-80WD Wireless Carbon Fiber, allowing you to hot swap for uninterrupted use.The two included NP-F750-type batteries will run the system for approximately 10 hours. The remote features an integrated display, and during time-lapse moves you can turn the controller off to save battery power.Remote Controller
The wireless controller features its own internal battery and also an integrated display screen that shows slider battery power remaining, remote controller battery power remaining, Bluetooth signal strength, and info on your move.The remote controller allows you to set keyframes and also control the duration of the move. You can use the remote to control the slider in manual video mode. As well as in auto mode for video, auto loop, time-lapse, and also panoramic stills shooting- The slider can traverse the 32" sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
- In time-lapse mode, the speed range is 114 seconds to 22 minutes and 30 seconds at its slowest
| GVM has put together this 672S Bi-Color LED Video 2-Light Kit for image makers who require a complete system with color and power options. The kit includes two green 672S Bi-Color LED Panels with 4-way barndoors, AC power adapters, and soft filters.The 13.4 x 12.7 x 3" 672S Bi-Color LED Panel is a compact light source with a color range from a warm 3200K to daylight-balanced 5600K to meet any ambient light challenge, match other fixtures, or just for creative expression. The light's high CRI/TLCI rating of 97 is an indicator of accuracy in rendering color.The GVM-672S has a wide beam spread that can be controlled with the light's four-way barndoors. Simply swing one or more of the barndoor's leaves into the path of the beam to light areas that you want to and keep light from areas that you don't want illuminated.The light is dimmable too, and while you can make adjustments locally on the fixture. You can also make them with up to 120 fixtures via GVM's 12-channel Multi-Function Master/Slave Control. Or also with the included wireless remote control.The GVM 672S Bi-Color LED Video 2-Light Kit runs on 110-220 VAC for worldwide use via the included AC adapter. But it will also run on NP-F-type batteries when mains power is unavailable. The light comes with two diffusion filters to soften the bright LEDs. |
