| Description | - Ball Bearing Slider with 11 lb Payload
- Stainless Steel Dampening Flywheel
- 1/4"-20 Camera Screw and 3/8"-16 Bushing
- 1/4"-20 and 3/8"-16 Tripod Mount Threads
| - Designed for Videographers & Filmmakers
- Load Capacity: 22 lb
- Maximum Height: 73.6"
- Minimum Height: 25.4"
| - Designed for Videographers & Filmmakers
- Load Capacity: 22 lb
- Maximum Height: 69.7"
- Minimum Height: 27.2"
| - 3200 to 5600K Color Temperature Output
- Dimming from 100 to 10% Brightness
- Discrete Color Temp and Dimming Knobs
- Integrated Li-Ion Batteries
| - Variable Color Temperature: 3200-5600K
- 1-100% Dimmable, CRI:97
- Includes Light Stand, Smartphone Holder
- Bluetooth Receiver, Shoe Mount Screw
| Key Features- 30" Quiet Motorized Sliding Range
- Supports Cameras up to 11 Pounds
- Programmable Shooting Modes
- Straight, Parallax, or 120 ? Panning
The 32" ?GVM Professional Video Carbon Fiber Motorized Camera Slider ?features an 11-pound load capacity as well as a 30" slider range along the carbon fiber rails, but that is just the tip of its capabilities. |
| Content | The GVM GP-80FW Carbon Fiber Camera Slider with Flywheel measures 33" end to end and provides 31" of travel distance. It supports up to 11 lb loads and can be set up on flat or uneven surfaces thanks to independently adjustable feet.A 1/4"-20 to 3/8"-16 bushing adapter is also included so you can attach compatible tripod heads or ball heads to the camera platform, which is padded to prevent twisting and scratching.While the slider's ball bearing sliding carriage allows for smooth glides, the included stainless steel flywheel with a crank handle adds a damping effect to the slides. Using a belt-driven pulley system, the flywheel ensures a smoother acceleration and deceleration and does away with jerky starts and stops.A plate on the bottom provides 1/4"-20 and 3/8"-16 tripod mount threads. For mounting the slider on virtually any tripod to achieve horizontal or also angled shots at an elevated position. A carry case is also included for convenient transport and storage.Key Features- 31" of travel distance
- 11 lb load capacity
- 1/4"-20 camera screw and also 3/8"-16 bushing
- Independently adjustable feet
- Stainless steel flywheel with a crank handle for smooth acceleration and also deceleration
- 1/4"-20 and 3/8"-16 tripod mount threads
UPC: 738629502369 | GVM G175 Aluminum 5-Section Monopod
This Aluminum 5-Section Monopod with Video Fluid Head from GVM has a 5-section design specially designed for videographers and filmmakers. The monopod features a press-type button for vertical tilting, and a ball locking knob lets you adjust the dampening force for various shooting environments.GVM G175 Aluminum 5-Section Monopod With a maximum height of 73.6" and a minimum height of just 25.4", the monopod can be adjusted to suit users of varying heights and for various different tasks, and the units 22 lb payload capacity provides the support needed for most camera and camcorder systems.- Aluminum, 5-section monopod with video fluid head
- Specially designed for videographers and filmmakers
- Press-type button for vertical tilting
- Ball locking knob for adjusting the dampening force
- Adjustable support feet
- Quick Release Plate with 1/4"-20 and 3/8"-16 screws
- 360 ? rotation
UPC: 717351605661 | This Carbon Fiber 4-Section Monopod with Video Fluid Head from GVM has a 4-section design specially designed for videographers and filmmakers. The monopod features a press-type button for vertical tilting, and a ball locking knob lets you adjust the dampening force for various shooting environments.GVM Carbon Fiber 4-Section Monopod With a maximum height of 69.7" and a minimum height of just 27.2", the monopod can be adjusted to suit users of varying heights and for various different tasks, and the units 22 lb payload capacity provides the support needed for most camera and camcorder systems.- Carbon fiber, 4-section monopod with video fluid head
- Specially designed for videographers and filmmakers
- Press-type button for vertical tilting
- Ball locking knob for adjusting the dampening force
- Adjustable support feet
- Quick Release Plate with 1/4"-20 and 3/8"-16 screws
- 360 ? rotation
UPC: 738629502352 | The GVM 5S Professional Video Variable On-Camera Video Light LED Panel Kit is a lightweight yet durable LED light fixture suitable for use on a camera or also light stand. This fixture features variable color temperature output from 3200 to 5600K, dimming from 100 to 10% brightness, and also a 45 ? beam angle.Two discrete knobs, one for color temperature and also one for dimming. Allow you to independently adjust both parameters.The GVM 5S Professional Video Variable On-CameraFixture is passively cooled. With the aluminum backplate featuring raised fins to aid in the cooling. On the front of the fixture are magnetic attachment points for the included diffusion filter. Allowing you to easily attach or also remove it from the light.On the bottom of the light is a 1/4"-20 threaded mounting hole. For attaching to articulating arms, light stands, or also the included cold shoe adapter. The integrated battery will run the light for up to four hours on a single charge.The GVM 5S Professional Video Variable On-Camera included cold shoe adapter features 180. ? of articulation. Pressing the on/off/mode button for five seconds also allows you to change the color mode | The GVM HD-14S Bi-Color LED Ring Light is a unique light source that envelopes your subject in soft, nearly shadowless light that is very flattering to skin tones and renders interesting catchlights in the eyes of your subject. GVM also includes a diffuser for those who want a soft look.While the light can be used off-axis on the included stand, its effect is even more pronounced when you shoot through it with a camera's lens or a smartphone in its holder in the center of the light. The ring light has color temperature that's variable from a warm 3200 to a cool 5600K.GVM HD-14S Bi-Color LED Ring Light To match other fixtures or ambient light situations or for creative effects. Both color and light intensity are adjustable on the unit or with your phone and the provided Bluetooth receiver. A 110 to 220 VAC adapter is provided, as is a carry case for storage and transport.UPC: 798863233856 | The 32" ?GVM Professional Video Carbon Fiber Motorized Camera Slider ?features an 11-pound load capacity as well as a 30" slider range along the carbon fiber rails, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode.The GVM GP-80QD Professional Video Carbon Fiber rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120 ? panoramic camera move.The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours.GVM GP-80QD Professional Video Carbon Fiber An included ball joint head mounts on the slider carriage and allows you to orient your camera easily and hold its position as it moves along the track. Six different camera control cables are included, allowing the slider controller to interface with most cameras.Load Capacity
The slider supports up to 11 pounds when horizontal, and 5.5 pounds when set at a 30 ? incline.Programmable Modes- Automatic: Allows you to set the sliding range along the slider as it cycles between the endpoints of the range.
- Video capture: Suitable for interviews as the motor is silent.
- Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the GVM GP-80QD Professional Video Carbon Fiber as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide.You can also set it so the camera shoots in a parabola to keep the subject centered during the move. Also it pans the camera up to 120 ? to create a panoramic shot.Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon. Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and also others. |
