Assured Gift with each Purchase

Genuine Products | Fast Support | Fast Delivery

AWPRO-LOGO

GVM GP-80FW Carbon Fiber Camera Slider with Flywheel (33″)

Brand:GVM

579.00 د.إ
Excl. VAT

Out of stock
Sold: 0
Available: 0
  • Ball Bearing Slider with 11 lb Payload
  • Stainless Steel Dampening Flywheel
  • 1/4″-20 Camera Screw and 3/8″-16 Bushing
  • 1/4″-20 and 3/8″-16 Tripod Mount Threads
Out of stock
Add to Wishlist
Add to Wishlist
Add to Wishlist
Add to Wishlist
Enjoy free shipping on orders above AED 300
  • Genuine Products
  • Manufacturer's Warranty
  • Exclusive Offers
  • Delivery within 1-3 Days
  • Secured Payment

Description

The GVM GP-80FW Carbon Fiber Camera Slider with Flywheel measures 33″ end to end and provides 31″ of travel distance. It supports up to 11 lb loads and can be set up on flat or uneven surfaces thanks to independently adjustable feet.

A 1/4″-20 to 3/8″-16 bushing adapter is also included so you can attach compatible tripod heads or ball heads to the camera platform, which is padded to prevent twisting and scratching.

While the slider’s ball bearing sliding carriage allows for smooth glides, the included stainless steel flywheel with a crank handle adds a damping effect to the slides. Using a belt-driven pulley system, the flywheel ensures a smoother acceleration and deceleration and does away with jerky starts and stops.

A plate on the bottom provides 1/4″-20 and 3/8″-16 tripod mount threads. For mounting the slider on virtually any tripod to achieve horizontal or also angled shots at an elevated position. A carry case is also included for convenient transport and storage.

Key Features

  • 31″ of travel distance
  • 11 lb load capacity
  • 1/4″-20 camera screw and also 3/8″-16 bushing
  • Independently adjustable feet
  • Stainless steel flywheel with a crank handle for smooth acceleration and also deceleration
  • 1/4″-20 and 3/8″-16 tripod mount threads

UPC: 738629502369

Quick Comparison

SettingsGVM GP-80FW Carbon Fiber Camera Slider with Flywheel (33") removeGVM GP-80QD Professional Video Carbon Fiber Motorized Camera Slider (32") removeGVM GT-120WD Wireless Carbon Fiber Motorized Camera Slider (47") with Bluetooth Remote removeGVM 5S Professional Video Variable On-Camera Video Light LED Panel Kit removeGVM C330 Turtle-Base C-Stand & Grip Arm Kit (10.5') removeGVM Carbon Fiber 4-Section Monopod with Video Fluid Head remove
NameGVM GP-80FW Carbon Fiber Camera Slider with Flywheel (33") removeGVM GP-80QD Professional Video Carbon Fiber Motorized Camera Slider (32") removeGVM GT-120WD Wireless Carbon Fiber Motorized Camera Slider (47") with Bluetooth Remote removeGVM 5S Professional Video Variable On-Camera Video Light LED Panel Kit removeGVM C330 Turtle-Base C-Stand & Grip Arm Kit (10.5') removeGVM Carbon Fiber 4-Section Monopod with Video Fluid Head remove
ImageGVM GP-80FW Carbon Fiber Camera SliderGVM GP-80QD Professional Video Carbon FiberGVM GT-120WD Wireless Carbon FiberGVM 5S Professional Video Variable On-CameraGVM C330 Turtle-Base C-Stand & Grip Arm KitGVM Carbon Fiber 4-Section Monopod
SKUAWP001144
Rating
Price579.00 د.إ
Excl. VAT
1,579.00 د.إ
Excl. VAT
1,629.00 د.إ
Excl. VAT
276.00 د.إ
Excl. VAT
515.34 د.إ
Excl. VAT
759.00 د.إ
Excl. VAT
Stock
Out of stock
Out of stock
Out of stock
Out of stock
Out of stock
Out of stock
AvailabilityOut of stockOut of stockOut of stockOut of stockOut of stockOut of stock
Add to cart

Read more

Read more

Read more

Read more

Read more

Read more

Description
  • Ball Bearing Slider with 11 lb Payload
  • Stainless Steel Dampening Flywheel
  • 1/4"-20 Camera Screw and 3/8"-16 Bushing
  • 1/4"-20 and 3/8"-16 Tripod Mount Threads
Key Features
  • 30" Quiet Motorized Sliding Range
  • Supports Cameras up to 11 Pounds
  • Programmable Shooting Modes
  • Straight, Parallax, or 120 ? Panning
The 32" ?GVM Professional Video Carbon Fiber Motorized Camera Slider ?features an 11-pound load capacity as well as a 30" slider range along the carbon fiber rails, but that is just the tip of its capabilities.
  • Wireless Programmable Motorized Slider
  • Robust 47" Portable Travel Slider
  • Carbon Fiber Rails
  • Supports up to 11 Pounds
  • 3200 to 5600K Color Temperature Output
  • Dimming from 100 to 10% Brightness
  • Discrete Color Temp and Dimming Knobs
  • Integrated Li-Ion Batteries
  • Load Capacity: 44 lb
  • Maximum Height: 126"
  • Minimum Height: 53", 3 x Sections
  • 40" Arm with Grip Head
  • Designed for Videographers & Filmmakers
  • Load Capacity: 22 lb
  • Maximum Height: 69.7"
  • Minimum Height: 27.2"
ContentThe GVM GP-80FW Carbon Fiber Camera Slider with Flywheel measures 33" end to end and provides 31" of travel distance. It supports up to 11 lb loads and can be set up on flat or uneven surfaces thanks to independently adjustable feet.A 1/4"-20 to 3/8"-16 bushing adapter is also included so you can attach compatible tripod heads or ball heads to the camera platform, which is padded to prevent twisting and scratching.While the slider's ball bearing sliding carriage allows for smooth glides, the included stainless steel flywheel with a crank handle adds a damping effect to the slides. Using a belt-driven pulley system, the flywheel ensures a smoother acceleration and deceleration and does away with jerky starts and stops.A plate on the bottom provides 1/4"-20 and 3/8"-16 tripod mount threads. For mounting the slider on virtually any tripod to achieve horizontal or also angled shots at an elevated position. A carry case is also included for convenient transport and storage.

Key Features

  • 31" of travel distance
  • 11 lb load capacity
  • 1/4"-20 camera screw and also 3/8"-16 bushing
  • Independently adjustable feet
  • Stainless steel flywheel with a crank handle for smooth acceleration and also deceleration
  • 1/4"-20 and 3/8"-16 tripod mount threads

UPC: 738629502369

The 32" ?GVM Professional Video Carbon Fiber Motorized Camera Slider ?features an 11-pound load capacity as well as a 30" slider range along the carbon fiber rails, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode.The GVM GP-80QD Professional Video Carbon Fiber rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120 ? panoramic camera move.The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours.GVM GP-80QD Professional Video Carbon Fiber An included ball joint head mounts on the slider carriage and allows you to orient your camera easily and hold its position as it moves along the track. Six different camera control cables are included, allowing the slider controller to interface with most cameras.

Load Capacity

The slider supports up to 11 pounds when horizontal, and 5.5 pounds when set at a 30 ? incline.

Programmable Modes

  • Automatic: Allows you to set the sliding range along the slider as it cycles between the endpoints of the range.
  • Video capture: Suitable for interviews as the motor is silent.
  • Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.

Orientation

Adjusting the channel between the support rails allows you to adjust the position of your head on the GVM GP-80QD Professional Video Carbon Fiber as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide.You can also set it so the camera shoots in a parabola to keep the subject centered during the move. Also it pans the camera up to 120 ? to create a panoramic shot.

Camera Compatibility

The slider includes six cables that enable the controller to interface with a variety of cameras from Canon. Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and also others.
The GVM GT-120WD Wireless Carbon Fiber Motorized Camera Slider (47") with Bluetooth Remote is a motorized slider that you can program and control remotely using the included Bluetooth remote controller or a downloadable app.The motorized slider features carbon fiber rails and is belt driven, which delivers a smooth sliding action along the 47" of slider travel. The slider carriage has a built-in bubble level so you can check that your setup is level. Built-in independently adjustable feet allow you to adjust the slider's position and level. The slider has a load capacity of 11 pounds when horizontal.The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as timelapse, with multiple key framed positions per move. The motorized slider powers from a single NP-F750 battery, allowing you to hot swap for uninterrupted use.The GVM GT-120WD Wireless Carbon Fiber two included NP-F750-type batteries will run the system for approximately 10 hours. The remote features an integrated display, and during time-lapse moves you can turn the controller off to save battery power.

Remote Controller

The GVM GT-120WD Wireless Carbon Fiber controller features its own internal battery. And also an integrated display screen that shows slider battery power remaining. Remote controller battery power remaining, Bluetooth signal strength, and also info on your move.The remote controller allows you to set keyframes and control the duration of the move. You can use the remote to control the slider in manual video mode, as well as in auto mode for video. Auto loop, time-lapse, and also panoramic stills shooting

UPC: 675663007170

The GVM 5S Professional Video Variable On-Camera Video Light LED Panel Kit is a lightweight yet durable LED light fixture suitable for use on a camera or also light stand. This fixture features variable color temperature output from 3200 to 5600K, dimming from 100 to 10% brightness, and also a 45 ? beam angle.Two discrete knobs, one for color temperature and also one for dimming. Allow you to independently adjust both parameters.The GVM 5S Professional Video Variable On-CameraFixture is passively cooled. With the aluminum backplate featuring raised fins to aid in the cooling. On the front of the fixture are magnetic attachment points for the included diffusion filter. Allowing you to easily attach or also remove it from the light.On the bottom of the light is a 1/4"-20 threaded mounting hole. For attaching to articulating arms, light stands, or also the included cold shoe adapter. The integrated battery will run the light for up to four hours on a single charge.The GVM 5S Professional Video Variable On-Camera included cold shoe adapter features 180. ? of articulation. Pressing the on/off/mode button for five seconds also allows you to change the color modeThe ?10.5' ?GVM C330 Turtle-Base C-Stand & Grip Arm Kit is used for mounting lighting equipment and a variety of light-shaping tools and accessories. Constructed from stainless steel, the stand employs two risers and three sections that fully extend to a height of 126".The GVM C330 Turtle-Base C-Stand & Grip Arm Kit turtle base detaches completely from the riser. The base has wide C-type legs with a stable footprint of 27.6" that accommodates easy sandbagging and straddling of obstacles as well as folding flat.The stand has a 5/8" stud for lights or other gear. It comes with a 40" grip arm as well as a separate grip head that allows the clamped arm to travel anywhere along its length for positioning modifiers such as silks, flags, and scrims.
  • UPC: 738629502345

 This Carbon Fiber 4-Section Monopod with Video Fluid Head from GVM has a 4-section design specially designed for videographers and filmmakers. The monopod features a press-type button for vertical tilting, and a ball locking knob lets you adjust the dampening force for various shooting environments.GVM Carbon Fiber 4-Section Monopod With a maximum height of 69.7" and a minimum height of just 27.2", the monopod can be adjusted to suit users of varying heights and for various different tasks, and the units 22 lb payload capacity provides the support needed for most camera and camcorder systems.
  • Carbon fiber, 4-section monopod with video fluid head
  • Specially designed for videographers and filmmakers
  • Press-type button for vertical tilting
  • Ball locking knob for adjusting the dampening force
  • Adjustable support feet
  • Quick Release Plate with 1/4"-20 and 3/8"-16 screws
  • 360 ? rotation

UPC: 738629502352

WeightN/AN/AN/AN/AN/AN/A
DimensionsN/AN/AN/AN/AN/AN/A
Additional information
Shopping Cart
No products in the basket.
Select the fields to be shown. Others will be hidden. Drag and drop to rearrange the order.
  • Image
  • SKU
  • Rating
  • Price
  • Stock
  • Availability
  • Description
  • Weight
  • Dimensions
  • Additional information
  • Add to cart
Click outside to hide the comparison bar
Compare