| Description | - Load Capacity: 44 lb
- Maximum Height: 126"
- Minimum Height: 53", 3 x Sections
- 40" Arm with Grip Head
| - Measures 22.6 x 15.2 x 4.7"
- Variable Color: 2000-5600K, CRI/TLCI: 95
- RGB Mode w/ 0-100% Saturation Control
- 0-360-Degree Hue Control
| - 30" Quiet Motorized Sliding Range
- Supports Cameras up to 30 Pounds
- Programmable Shooting Modes
- Straight, Parallax, or 120 ? Panning
| - Slider/Skate Dolly Combo, 11 lb Payload
- 31.5 and 15.75" Interchangeable Tracks
- Height Risers Lift Wheels Off the Ground
- 1/4"-20 Camera Screw; Tripod Threads
| - 2 x GVM-520LS-B Bi-Color LED Panels
- Variable Color Temperature: 3200-5600K
- Dimming: 10-100%
- CRI/TLCI: 97
| - Designed for Videographers & Filmmakers
- Load Capacity: 22 lb
- Maximum Height: 69.7"
- Minimum Height: 27.2"
|
| Content | The ?10.5' ?GVM C330 Turtle-Base C-Stand & Grip Arm Kit is used for mounting lighting equipment and a variety of light-shaping tools and accessories. Constructed from stainless steel, the stand employs two risers and three sections that fully extend to a height of 126".The GVM C330 Turtle-Base C-Stand & Grip Arm Kit turtle base detaches completely from the riser. The base has wide C-type legs with a stable footprint of 27.6" that accommodates easy sandbagging and straddling of obstacles as well as folding flat.The stand has a 5/8" stud for lights or other gear. It comes with a 40" grip arm as well as a separate grip head that allows the clamped arm to travel anywhere along its length for positioning modifiers such as silks, flags, and scrims. | The 22.6 x 15.2 x 4.7" 110S RGB LED Studio Video Light Panel from GVM is a compact light source with a wide color range from a warm 2000K to daylight 5600K to meet any ambient light challenge, match other fixtures, or just for creative expression.The light's high CRI/TLCI rating of 95 is an indicator of accuracy in rendering color. The light also has an RGB Mode (Red, Green, Blue) with 0 to 100% Saturation control, and 360-degree Hue selection that gives you access to literally millions of color combinations for fine-tuning and customizing the light's output.The GVM 110S RGB LED Studio Video Light Panel has a wide 120-degree beam spread that can be narrowed with the light's four-way barndoors. Simply swing one or more of the barndoor's leaves into the path of the beam to light areas that you want to and keep light from areas that you don't want illuminated.The panel is dimmable too, from 0 to 100% and while you can make adjustments locally on the fixture, you can also make them via DMX or wirelessly via a "Master/Slave" connection with several panels. Featuring aluminum construction, the fixture has a yoke that allows 360-degree rotation for unlimited positioning options.The 110RGB runs on 100-240 VAC voltage using the included AC adapter. But it will also run on optional V-Mount batteries when mains power is unavailable. The light comes with a soft filter and a bracket soft filter to soften the bright LEDs' output. A case for storage and also transport is also provided.Benefits- Wide 120-degree beam angle
- 4-Way barndoors for shaping light
- 100-240 VAC adapter or also optional V-Mount batteries
- Quiet fan cooling
- 2000-5600K Variable color temperature with high CRI/TLCI rating of 95
- RGB Mode with 0-100% Saturation and 0-360-degree Hue selection for myriad custom colors
- 0-100% Stepless dimming
- Wireless DMX and also remote control
- 360-Degree rotating U-bracket
| The 32" ?GVM Professional Video Aluminum Alloy Motorized Camera Slider ?features a 30-pound load capacity as well as a 30" slider range, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode.The GVM GT-J80D Professional Video Aluminum Alloy Motorized Camera rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120 ? panoramic camera move.The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting.The GVM GT-J80D Professional Video Aluminum Alloy Motorized Camera slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours. Six different camera control cables are include allowing the slider controller to interface with most cameras.Programmable Modes
Automatic: Allows you to set the sliding range along the slider as it cycles between the end points of the range.
Video capture: Suitable for interviews as the motor is silent.
Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.Orientation
GVM GT-J80D Professional Video Aluminum Alloy Motorized Camera Adjusting the channel between the support rails. Allows you to adjust the position of your head on the slider as it moves between the ends of the slider track.The channel can be positioned so there is no movement during the slide. You can also set it so the camera shoots in a parabola to keep the subject center during the move. Also it pans the camera up to 120 ? to create a panoramic shot.Camera Compatibility
The GVM GT-J80D Professional Video Aluminum Alloy Motorized Camera slider. Includes six cables that enable the controller to interface with a variety of cameras from Canon. Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and others.UPC: 682141383848 | The GVM Dolly Track Camera Slider can be used as a slider or a skate dolly. It comes with two sliding tracks of different lengths, to be used interchangeably as your needs require. One track is 31.5" long and the other 15.75" long for shots closer to your subject, especially in tight spots.Included front and rear wheels attach to the ends of the track and can be left there at all times. Built-in height adjustment risers allow you to raise the wheels off the ground/surface so you can use the sliding track only.Thanks to these risers the wheels don't need to be removed and you can switch back to them for dolly action by adjusting the risers, but the wheels can be removed if you want. The weight capacity is 11 lb when using either track, so you can mount your camera loaded with various accessories.The sliding camera carriage features a 1/4"-20 mounting screw and also offers 1/4"-20 and 3/8"-16 accessory mounting threads and a bubble level. A 1/4"-20 to 3/8"-16 bushing adapter is also included so you can attach compatible tripod heads or ball heads to the camera platform.On the bottom of the sliding track, there are also 1/4"-20 and 3/8"-16 tripod mount threads, so this compact dolly/slider allows for use on the ground, desktops, and mounted on a tripod.Key Features- Can be used as a slider or a skate dolly
- 11 lb weight capacity
- Includes two interchangeable sliding tracks, 31.5 and 15.75" long
- Removable front and rear wheels can be left on at all times because height risers. Allow you to lift them off the ground so you can use the slider mode
- 1/4"-20 camera screw and 3/8"-16 bushing adapter
- 1/4"-20 and 3/8"-16 accessory mounting threads on the slider carriage
- 1/4"-20 and 3/8"-16 tripod mount threads
- Bubble level
UPC: 738629502376 | Built around a 12.7 x 13.4 x 3.1" bi-color LED panel, the GVM 520LS-B Bi-Color LED 2-Panel Kit contains two dimmable metal panels with color that's variable from 3200 to 5600K. Each panel comes with a soft filter to diffuse the light quality of the bright LEDs, an AC adapter and power cable, plates for two optional NP-F batteries, and a large carry bag for storage and transport.Transform your video production with the GVM 520LS-B Bi-Color LED 2-Panel Kit, offering dynamic colors and precision control for unparalleled lighting versatility. Achieve professional-quality illumination, creating vibrant and visually captivating scenes effortlessly. The lights' RGB capabilities allow you to fine-tune the ambiance, enhancing the mood and impact of your content.With user-friendly adjustments and robust construction, this kit is perfect for filmmakers. Content creators, and photographers seeking reliable and creative lighting solutions. Take your projects to new heights with the GVM 50RS2L. Unlocking a world of possibilities for expressive and visually stunning video productions. | This Carbon Fiber 4-Section Monopod with Video Fluid Head from GVM has a 4-section design specially designed for videographers and filmmakers. The monopod features a press-type button for vertical tilting, and a ball locking knob lets you adjust the dampening force for various shooting environments.GVM Carbon Fiber 4-Section Monopod With a maximum height of 69.7" and a minimum height of just 27.2", the monopod can be adjusted to suit users of varying heights and for various different tasks, and the units 22 lb payload capacity provides the support needed for most camera and camcorder systems.- Carbon fiber, 4-section monopod with video fluid head
- Specially designed for videographers and filmmakers
- Press-type button for vertical tilting
- Ball locking knob for adjusting the dampening force
- Adjustable support feet
- Quick Release Plate with 1/4"-20 and 3/8"-16 screws
- 360 ? rotation
UPC: 738629502352 |
