| Description | - Load Capacity: 44 lb
- Maximum Height: 126"
- Minimum Height: 53", 3 x Sections
- 40" Arm with Grip Head
| - Wireless Programmable 3-Axis Slider
- Mobile App Control
- Carbon Fiber Rails
- Supports up to 11 lb
| - 3200 to 5600K Color Temperature Output
- Dimming from 100 to 10% Brightness
- Discrete Color Temp and Dimming Knobs
- Integrated Li-Ion Batteries
| - Designed for Videographers & Filmmakers
- Load Capacity: 22 lb
- Maximum Height: 69.7"
- Minimum Height: 27.2"
| Key Features- 30" Quiet Motorized Sliding Range
- Supports Cameras up to 11 Pounds
- Programmable Shooting Modes
- Straight, Parallax, or 120 ? Panning
The 32" ?GVM Professional Video Carbon Fiber Motorized Camera Slider ?features an 11-pound load capacity as well as a 30" slider range along the carbon fiber rails, but that is just the tip of its capabilities. | - Slider/Skate Dolly Combo, 11 lb Payload
- 31.5 and 15.75" Interchangeable Tracks
- Height Risers Lift Wheels Off the Ground
- 1/4"-20 Camera Screw; Tripod Threads
|
| Content | The ?10.5' ?GVM C330 Turtle-Base C-Stand & Grip Arm Kit is used for mounting lighting equipment and a variety of light-shaping tools and accessories. Constructed from stainless steel, the stand employs two risers and three sections that fully extend to a height of 126".The GVM C330 Turtle-Base C-Stand & Grip Arm Kit turtle base detaches completely from the riser. The base has wide C-type legs with a stable footprint of 27.6" that accommodates easy sandbagging and straddling of obstacles as well as folding flat.The stand has a 5/8" stud for lights or other gear. It comes with a 40" grip arm as well as a separate grip head that allows the clamped arm to travel anywhere along its length for positioning modifiers such as silks, flags, and scrims. | The 32" ?GVM 3D 3-Axis Wireless Carbon Fiber Motorized Slider with Bluetooth Remote is a 3-axis motorized slider (track slide, pan, and tilt) that you can program and control remotely using the included Bluetooth remote controller. The motorized slider features carbon fiber rails and is belt-driven, which delivers a smooth sliding action along the 31" of travel.The GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized slider carriage has a built-in bubble level so you can check that your setup is level, and built-in independently adjustable feet allow you to adjust its position and level. An included motorized pan base mounts onto the slider carriage providing 360 ? of pan and tilt. The slider has a load capacity of 11 lb when horizontal.GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized Slider The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as time-lapse, with multiple keyframed positions per move. The motorized slider powers from an included AC power supply or you can use two NP-F750-type batteries for approximately 10 hours of power.You can hot-swap batteries during the slider move for increased runtime. Six included camera control cables allow the system to trigger your camera for time-lapse. The remote features an integrated display and can be turned off during time-lapse moves to preserve battery power.Camera Control Cables
Included with the system are six shutter cables that allow limited control, such as shutter trigger, of your camera from the system. The cameras you can control include:- DC2: Nikon D7100/D7000/D5300/D5100/D5000/D3200/D3100/D610/D600/D90/DF
- N3: Canon EOS 7D/5D-series/1D/6D/50D/40D/30D/20D
- S2: Sony NEX-3NL/a7/a7R/a6000/a5000/a3000
- L1: Panasonic DMC-FZ50K/DMC-FZ150D/DMC-FZ30K/DMC-FZ20/DMC-FZ20K/DMC-FZ20S/DMC-FZ200/LC-1/L1/L10/G10/G2/G1/GF1/GH2/GX1/G5/DIGILUX2/DIGILUX3
- DC0: Nikon D850/D810/D800E/D800/D700?D300s/D200/D5/D4/D3/DF/D1/F90/F90X/F100
Remote Controller
The GVM 3D-80 3-Axis Wireless Carbon Fiber Motorized Slider wireless controller features an internal battery. And an integrated display screen that shows slider battery power remaining. Remote controller battery power remaining, Bluetooth signal strength. And also info on your move. The remote controller allows you to set keyframes and control the duration of the moveRemote Control
You can use the remote to control the slider in manual video mode. As well as in auto mode for video, auto loop, time-lapse, and panoramic stills shooting- The slider can traverse the 31" sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
- In time-lapse, the speed range is 114 seconds to 22 minutes, and 30 seconds at its slowest
The pan and tilt axis each features 360 ? of rotation | The GVM 5S Professional Video Variable On-Camera Video Light LED Panel Kit is a lightweight yet durable LED light fixture suitable for use on a camera or also light stand. This fixture features variable color temperature output from 3200 to 5600K, dimming from 100 to 10% brightness, and also a 45 ? beam angle.Two discrete knobs, one for color temperature and also one for dimming. Allow you to independently adjust both parameters.The GVM 5S Professional Video Variable On-CameraFixture is passively cooled. With the aluminum backplate featuring raised fins to aid in the cooling. On the front of the fixture are magnetic attachment points for the included diffusion filter. Allowing you to easily attach or also remove it from the light.On the bottom of the light is a 1/4"-20 threaded mounting hole. For attaching to articulating arms, light stands, or also the included cold shoe adapter. The integrated battery will run the light for up to four hours on a single charge.The GVM 5S Professional Video Variable On-Camera included cold shoe adapter features 180. ? of articulation. Pressing the on/off/mode button for five seconds also allows you to change the color mode | This Carbon Fiber 4-Section Monopod with Video Fluid Head from GVM has a 4-section design specially designed for videographers and filmmakers. The monopod features a press-type button for vertical tilting, and a ball locking knob lets you adjust the dampening force for various shooting environments.GVM Carbon Fiber 4-Section Monopod With a maximum height of 69.7" and a minimum height of just 27.2", the monopod can be adjusted to suit users of varying heights and for various different tasks, and the units 22 lb payload capacity provides the support needed for most camera and camcorder systems.- Carbon fiber, 4-section monopod with video fluid head
- Specially designed for videographers and filmmakers
- Press-type button for vertical tilting
- Ball locking knob for adjusting the dampening force
- Adjustable support feet
- Quick Release Plate with 1/4"-20 and 3/8"-16 screws
- 360 ? rotation
UPC: 738629502352 | The 32" ?GVM Professional Video Carbon Fiber Motorized Camera Slider ?features an 11-pound load capacity as well as a 30" slider range along the carbon fiber rails, but that is just the tip of its capabilities. It has an attached controller that enables you to select and control the start/stop positions of the slider along the track, as well as selecting between video and still photo mode.The GVM GP-80QD Professional Video Carbon Fiber rail bed features an adjustable channel that allows you to shoot straight (perpendicular to the track rails) in a parabola to keep a subject centered as the camera tracks from side to side, or it can create a 120 ? panoramic camera move.The height-adjustable feet are individually adjustable up to 0.79", allowing you to set up the slider on slightly uneven or non-level terrain, while three 1/4"-20 and three 3/8"-16 threaded mounting holes enable tripod mounting. The slider is powered via a removable 4400mAh NP-F-type battery that will run the slider for about eight hours.GVM GP-80QD Professional Video Carbon Fiber An included ball joint head mounts on the slider carriage and allows you to orient your camera easily and hold its position as it moves along the track. Six different camera control cables are included, allowing the slider controller to interface with most cameras.Load Capacity
The slider supports up to 11 pounds when horizontal, and 5.5 pounds when set at a 30 ? incline.Programmable Modes- Automatic: Allows you to set the sliding range along the slider as it cycles between the endpoints of the range.
- Video capture: Suitable for interviews as the motor is silent.
- Delay shooting: Single-frame shooting (time-lapse) with a selectable delay between 1 and 1000.
Orientation
Adjusting the channel between the support rails allows you to adjust the position of your head on the GVM GP-80QD Professional Video Carbon Fiber as it moves between the ends of the slider track. The channel can be positioned so there is no movement during the slide.You can also set it so the camera shoots in a parabola to keep the subject centered during the move. Also it pans the camera up to 120 ? to create a panoramic shot.Camera Compatibility
The slider includes six cables that enable the controller to interface with a variety of cameras from Canon. Sony, Nikon, Pentax, GoPro, Fuji, Panasonic, Lycra, Olympus, Samsung, and also others. | The GVM Dolly Track Camera Slider can be used as a slider or a skate dolly. It comes with two sliding tracks of different lengths, to be used interchangeably as your needs require. One track is 31.5" long and the other 15.75" long for shots closer to your subject, especially in tight spots.Included front and rear wheels attach to the ends of the track and can be left there at all times. Built-in height adjustment risers allow you to raise the wheels off the ground/surface so you can use the sliding track only.Thanks to these risers the wheels don't need to be removed and you can switch back to them for dolly action by adjusting the risers, but the wheels can be removed if you want. The weight capacity is 11 lb when using either track, so you can mount your camera loaded with various accessories.The sliding camera carriage features a 1/4"-20 mounting screw and also offers 1/4"-20 and 3/8"-16 accessory mounting threads and a bubble level. A 1/4"-20 to 3/8"-16 bushing adapter is also included so you can attach compatible tripod heads or ball heads to the camera platform.On the bottom of the sliding track, there are also 1/4"-20 and 3/8"-16 tripod mount threads, so this compact dolly/slider allows for use on the ground, desktops, and mounted on a tripod.Key Features- Can be used as a slider or a skate dolly
- 11 lb weight capacity
- Includes two interchangeable sliding tracks, 31.5 and 15.75" long
- Removable front and rear wheels can be left on at all times because height risers. Allow you to lift them off the ground so you can use the slider mode
- 1/4"-20 camera screw and 3/8"-16 bushing adapter
- 1/4"-20 and 3/8"-16 accessory mounting threads on the slider carriage
- 1/4"-20 and 3/8"-16 tripod mount threads
- Bubble level
UPC: 738629502376 |
