| Description | - Load Capacity: 44 lb
- Maximum Height: 126"
- Minimum Height: 53", 3 x Sections
- 40" Arm with Grip Head
| - Slider/Skate Dolly Combo, 11 lb Payload
- 31.5 and 15.75" Interchangeable Tracks
- Height Risers Lift Wheels Off the Ground
- 1/4"-20 Camera Screw; Tripod Threads
| - 2 x GVM-672S LED Panels
- 2 x Bracket Soft Filters
- 2 x Soft Filters
- Built-In Wireless Control
| - Wireless Programmable Motorized Slider
- Robust 31" Portable Travel Slider
- Carbon Fiber Rails
- Supports up to 5.5 Pounds
| - Measures 22.6 x 15.2 x 4.7"
- Variable Color: 2000-5600K, CRI/TLCI: 95
- RGB Mode w/ 0-100% Saturation Control
- 0-360-Degree Hue Control
| - 3200 to 5600K Color Temperature Output
- Dimming from 100 to 10% Brightness
- Discrete Color Temp and Dimming Knobs
- Integrated Li-Ion Batteries
|
| Content | The ?10.5' ?GVM C330 Turtle-Base C-Stand & Grip Arm Kit is used for mounting lighting equipment and a variety of light-shaping tools and accessories. Constructed from stainless steel, the stand employs two risers and three sections that fully extend to a height of 126".The GVM C330 Turtle-Base C-Stand & Grip Arm Kit turtle base detaches completely from the riser. The base has wide C-type legs with a stable footprint of 27.6" that accommodates easy sandbagging and straddling of obstacles as well as folding flat.The stand has a 5/8" stud for lights or other gear. It comes with a 40" grip arm as well as a separate grip head that allows the clamped arm to travel anywhere along its length for positioning modifiers such as silks, flags, and scrims. | The GVM Dolly Track Camera Slider can be used as a slider or a skate dolly. It comes with two sliding tracks of different lengths, to be used interchangeably as your needs require. One track is 31.5" long and the other 15.75" long for shots closer to your subject, especially in tight spots.Included front and rear wheels attach to the ends of the track and can be left there at all times. Built-in height adjustment risers allow you to raise the wheels off the ground/surface so you can use the sliding track only.Thanks to these risers the wheels don't need to be removed and you can switch back to them for dolly action by adjusting the risers, but the wheels can be removed if you want. The weight capacity is 11 lb when using either track, so you can mount your camera loaded with various accessories.The sliding camera carriage features a 1/4"-20 mounting screw and also offers 1/4"-20 and 3/8"-16 accessory mounting threads and a bubble level. A 1/4"-20 to 3/8"-16 bushing adapter is also included so you can attach compatible tripod heads or ball heads to the camera platform.On the bottom of the sliding track, there are also 1/4"-20 and 3/8"-16 tripod mount threads, so this compact dolly/slider allows for use on the ground, desktops, and mounted on a tripod.Key Features- Can be used as a slider or a skate dolly
- 11 lb weight capacity
- Includes two interchangeable sliding tracks, 31.5 and 15.75" long
- Removable front and rear wheels can be left on at all times because height risers. Allow you to lift them off the ground so you can use the slider mode
- 1/4"-20 camera screw and 3/8"-16 bushing adapter
- 1/4"-20 and 3/8"-16 accessory mounting threads on the slider carriage
- 1/4"-20 and 3/8"-16 tripod mount threads
- Bubble level
UPC: 738629502376 | GVM has put together this 672S Bi-Color LED Video 2-Light Kit for image makers who require a complete system with color and power options. The kit includes two green 672S Bi-Color LED Panels with 4-way barndoors, AC power adapters, and soft filters.The 13.4 x 12.7 x 3" 672S Bi-Color LED Panel is a compact light source with a color range from a warm 3200K to daylight-balanced 5600K to meet any ambient light challenge, match other fixtures, or just for creative expression. The light's high CRI/TLCI rating of 97 is an indicator of accuracy in rendering color.The GVM-672S has a wide beam spread that can be controlled with the light's four-way barndoors. Simply swing one or more of the barndoor's leaves into the path of the beam to light areas that you want to and keep light from areas that you don't want illuminated.The light is dimmable too, and while you can make adjustments locally on the fixture. You can also make them with up to 120 fixtures via GVM's 12-channel Multi-Function Master/Slave Control. Or also with the included wireless remote control.The GVM 672S Bi-Color LED Video 2-Light Kit runs on 110-220 VAC for worldwide use via the included AC adapter. But it will also run on NP-F-type batteries when mains power is unavailable. The light comes with two diffusion filters to soften the bright LEDs. | The GVM GT-80WD Wireless Carbon Fiber Motorized Camera Slider (31") with Bluetooth Remote is a motorized slider that you can program and control remotely using the included Bluetooth remote controller or a downloadable app. The motorized slider features carbon fiber rails and is belt driven, which delivers a smooth sliding action along the 31" of slider travel.The GVM GT-80WD Wireless Carbon Fiber carriage has a built-in bubble level so you can check that your setup is level. Built-in independently adjustable feet allow you to adjust the slider's position and level. The slider has a load capacity of 5.5 pounds when horizontal.The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as timelapse, with multiple key framed positions per move. The motorized slider powers from a single GVM GT-80WD Wireless Carbon Fiber, allowing you to hot swap for uninterrupted use.The two included NP-F750-type batteries will run the system for approximately 10 hours. The remote features an integrated display, and during time-lapse moves you can turn the controller off to save battery power.Remote Controller
The wireless controller features its own internal battery and also an integrated display screen that shows slider battery power remaining, remote controller battery power remaining, Bluetooth signal strength, and info on your move.The remote controller allows you to set keyframes and also control the duration of the move. You can use the remote to control the slider in manual video mode. As well as in auto mode for video, auto loop, time-lapse, and also panoramic stills shooting- The slider can traverse the 32" sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
- In time-lapse mode, the speed range is 114 seconds to 22 minutes and 30 seconds at its slowest
| The 22.6 x 15.2 x 4.7" 110S RGB LED Studio Video Light Panel from GVM is a compact light source with a wide color range from a warm 2000K to daylight 5600K to meet any ambient light challenge, match other fixtures, or just for creative expression.The light's high CRI/TLCI rating of 95 is an indicator of accuracy in rendering color. The light also has an RGB Mode (Red, Green, Blue) with 0 to 100% Saturation control, and 360-degree Hue selection that gives you access to literally millions of color combinations for fine-tuning and customizing the light's output.The GVM 110S RGB LED Studio Video Light Panel has a wide 120-degree beam spread that can be narrowed with the light's four-way barndoors. Simply swing one or more of the barndoor's leaves into the path of the beam to light areas that you want to and keep light from areas that you don't want illuminated.The panel is dimmable too, from 0 to 100% and while you can make adjustments locally on the fixture, you can also make them via DMX or wirelessly via a "Master/Slave" connection with several panels. Featuring aluminum construction, the fixture has a yoke that allows 360-degree rotation for unlimited positioning options.The 110RGB runs on 100-240 VAC voltage using the included AC adapter. But it will also run on optional V-Mount batteries when mains power is unavailable. The light comes with a soft filter and a bracket soft filter to soften the bright LEDs' output. A case for storage and also transport is also provided.Benefits- Wide 120-degree beam angle
- 4-Way barndoors for shaping light
- 100-240 VAC adapter or also optional V-Mount batteries
- Quiet fan cooling
- 2000-5600K Variable color temperature with high CRI/TLCI rating of 95
- RGB Mode with 0-100% Saturation and 0-360-degree Hue selection for myriad custom colors
- 0-100% Stepless dimming
- Wireless DMX and also remote control
- 360-Degree rotating U-bracket
| The GVM 5S Professional Video Variable On-Camera Video Light LED Panel Kit is a lightweight yet durable LED light fixture suitable for use on a camera or also light stand. This fixture features variable color temperature output from 3200 to 5600K, dimming from 100 to 10% brightness, and also a 45 ? beam angle.Two discrete knobs, one for color temperature and also one for dimming. Allow you to independently adjust both parameters.The GVM 5S Professional Video Variable On-CameraFixture is passively cooled. With the aluminum backplate featuring raised fins to aid in the cooling. On the front of the fixture are magnetic attachment points for the included diffusion filter. Allowing you to easily attach or also remove it from the light.On the bottom of the light is a 1/4"-20 threaded mounting hole. For attaching to articulating arms, light stands, or also the included cold shoe adapter. The integrated battery will run the light for up to four hours on a single charge.The GVM 5S Professional Video Variable On-Camera included cold shoe adapter features 180. ? of articulation. Pressing the on/off/mode button for five seconds also allows you to change the color mode |
