| Description | - Measures 12.7 x 13.4 x 3.1"
- Variable Color Temperature: 3200-5600K
- Dimming: 10-100%
- CRI/TLCI: 97
| - Measures 22.6 x 15.2 x 4.7"
- Variable Color: 2000-5600K, CRI/TLCI: 95
- RGB Mode w/ 0-100% Saturation Control
- 0-360-Degree Hue Control
| - 2000 to 5600K Variable Color Dial
- 10 to 100% Dimming
- Bicolor & Adjustable Color Modes
- Smartphone App Wi-Fi Control
| - Wireless Programmable Motorized Slider
- Robust 31" Portable Travel Slider
- Carbon Fiber Rails
- Supports up to 5.5 Pounds
| - Designed for Videographers & Filmmakers
- Load Capacity: 22 lb
- Maximum Height: 69.7"
- Minimum Height: 27.2"
| - Slider/Skate Dolly Combo, 11 lb Payload
- 31.5 and 15.75" Interchangeable Tracks
- Height Risers Lift Wheels Off the Ground
- 1/4"-20 Camera Screw; Tripod Threads
|
| Content | This GVM 520LS-B Bi-Color LED Video Light is a compact flat panel. LED fixture offering a wide color range from warm 3200K to daylight balanced 5600K. Designed to meet any ambient light challenge and further your creative expression, the light's high CRI/TLCI rating of 97 ensures accurate color rendering.The GVM 520LS-B Bi-Color LED Video Light is dimmable from 10 to 100%, features a 45 ? beam angle, and two NP-F battery plates are provided on the backside of the fixture for powering the light when AC power is unavailable. The fixture is made with aircraft-grade aluminum and the light is rated for 70,000 hours of use. | The 22.6 x 15.2 x 4.7" 110S RGB LED Studio Video Light Panel from GVM is a compact light source with a wide color range from a warm 2000K to daylight 5600K to meet any ambient light challenge, match other fixtures, or just for creative expression.The light's high CRI/TLCI rating of 95 is an indicator of accuracy in rendering color. The light also has an RGB Mode (Red, Green, Blue) with 0 to 100% Saturation control, and 360-degree Hue selection that gives you access to literally millions of color combinations for fine-tuning and customizing the light's output.The GVM 110S RGB LED Studio Video Light Panel has a wide 120-degree beam spread that can be narrowed with the light's four-way barndoors. Simply swing one or more of the barndoor's leaves into the path of the beam to light areas that you want to and keep light from areas that you don't want illuminated.The panel is dimmable too, from 0 to 100% and while you can make adjustments locally on the fixture, you can also make them via DMX or wirelessly via a "Master/Slave" connection with several panels. Featuring aluminum construction, the fixture has a yoke that allows 360-degree rotation for unlimited positioning options.The 110RGB runs on 100-240 VAC voltage using the included AC adapter. But it will also run on optional V-Mount batteries when mains power is unavailable. The light comes with a soft filter and a bracket soft filter to soften the bright LEDs' output. A case for storage and also transport is also provided.Benefits- Wide 120-degree beam angle
- 4-Way barndoors for shaping light
- 100-240 VAC adapter or also optional V-Mount batteries
- Quiet fan cooling
- 2000-5600K Variable color temperature with high CRI/TLCI rating of 95
- RGB Mode with 0-100% Saturation and 0-360-degree Hue selection for myriad custom colors
- 0-100% Stepless dimming
- Wireless DMX and also remote control
- 360-Degree rotating U-bracket
| The 7S RGB LED On-Camera Light from GVM is a compact aluminum LED light featuring a 2000 to 5600K adjustable color temperature, iOS and Android smartphone app control via Wi-Fi, both bicolor and RGB modes, and a runtime of up to four hours.The GVM 7S RGB LED On-Camera Video Light comes with a 180 ? tilt shoe mount and has an easy-to-grip ribbed finish on the back. Two dials enable you to adjust the light's intensity and color temperature separately, and a magnetic diffusion filter is included for softening the light's output. When fully charged, the GVM-7S On-Camera Light lasts for up to four hours and can be used while being charged.Key Features- Slim, lightweight aluminum design
- Smartphone app control via Wi-Fi
- 80 surface-mount SMD LEDs
- Adjustable 2000 to 5600 RGB color mode plus a bicolor mode
- 10 to 100% dimming
- 97+ CRI
- Magnetic diffuser panel
- Includes tilting shoe mount adapter
- Built-in rechargeable battery
- Up to 4-hour runtime
| The GVM GT-80WD Wireless Carbon Fiber Motorized Camera Slider (31") with Bluetooth Remote is a motorized slider that you can program and control remotely using the included Bluetooth remote controller or a downloadable app. The motorized slider features carbon fiber rails and is belt driven, which delivers a smooth sliding action along the 31" of slider travel.The GVM GT-80WD Wireless Carbon Fiber carriage has a built-in bubble level so you can check that your setup is level. Built-in independently adjustable feet allow you to adjust the slider's position and level. The slider has a load capacity of 5.5 pounds when horizontal.The Bluetooth controller allows you to control and program the slider to do a variety of moves. The system supports live video shooting as well as timelapse, with multiple key framed positions per move. The motorized slider powers from a single GVM GT-80WD Wireless Carbon Fiber, allowing you to hot swap for uninterrupted use.The two included NP-F750-type batteries will run the system for approximately 10 hours. The remote features an integrated display, and during time-lapse moves you can turn the controller off to save battery power.Remote Controller
The wireless controller features its own internal battery and also an integrated display screen that shows slider battery power remaining, remote controller battery power remaining, Bluetooth signal strength, and info on your move.The remote controller allows you to set keyframes and also control the duration of the move. You can use the remote to control the slider in manual video mode. As well as in auto mode for video, auto loop, time-lapse, and also panoramic stills shooting- The slider can traverse the 32" sliding range in a minimum time of 11.4 seconds to a maximum time of 123 seconds in video mode
- In time-lapse mode, the speed range is 114 seconds to 22 minutes and 30 seconds at its slowest
| This Carbon Fiber 4-Section Monopod with Video Fluid Head from GVM has a 4-section design specially designed for videographers and filmmakers. The monopod features a press-type button for vertical tilting, and a ball locking knob lets you adjust the dampening force for various shooting environments.GVM Carbon Fiber 4-Section Monopod With a maximum height of 69.7" and a minimum height of just 27.2", the monopod can be adjusted to suit users of varying heights and for various different tasks, and the units 22 lb payload capacity provides the support needed for most camera and camcorder systems.- Carbon fiber, 4-section monopod with video fluid head
- Specially designed for videographers and filmmakers
- Press-type button for vertical tilting
- Ball locking knob for adjusting the dampening force
- Adjustable support feet
- Quick Release Plate with 1/4"-20 and 3/8"-16 screws
- 360 ? rotation
UPC: 738629502352 | The GVM Dolly Track Camera Slider can be used as a slider or a skate dolly. It comes with two sliding tracks of different lengths, to be used interchangeably as your needs require. One track is 31.5" long and the other 15.75" long for shots closer to your subject, especially in tight spots.Included front and rear wheels attach to the ends of the track and can be left there at all times. Built-in height adjustment risers allow you to raise the wheels off the ground/surface so you can use the sliding track only.Thanks to these risers the wheels don't need to be removed and you can switch back to them for dolly action by adjusting the risers, but the wheels can be removed if you want. The weight capacity is 11 lb when using either track, so you can mount your camera loaded with various accessories.The sliding camera carriage features a 1/4"-20 mounting screw and also offers 1/4"-20 and 3/8"-16 accessory mounting threads and a bubble level. A 1/4"-20 to 3/8"-16 bushing adapter is also included so you can attach compatible tripod heads or ball heads to the camera platform.On the bottom of the sliding track, there are also 1/4"-20 and 3/8"-16 tripod mount threads, so this compact dolly/slider allows for use on the ground, desktops, and mounted on a tripod.Key Features- Can be used as a slider or a skate dolly
- 11 lb weight capacity
- Includes two interchangeable sliding tracks, 31.5 and 15.75" long
- Removable front and rear wheels can be left on at all times because height risers. Allow you to lift them off the ground so you can use the slider mode
- 1/4"-20 camera screw and 3/8"-16 bushing adapter
- 1/4"-20 and 3/8"-16 accessory mounting threads on the slider carriage
- 1/4"-20 and 3/8"-16 tripod mount threads
- Bubble level
UPC: 738629502376 |
