| Description | The EIMAGE Cinema Skater is the ideal tool for quick cinematic camera movements. The unique articulating three wheels allow smooth tracking movements from side to side, forward/back And rotational tracking that basic linear sliders cannot perform. | - Use in Multiple Modes of Operation
- 15 lb Payload
- Flywheel Belt-Drive System
- Adjustable Resistance
Create cinematic camera movements with the ?ES-120 48" Carbon Fiber Slider ?from ?E-Image. The slider may be used in multiple modes of operation and can support up to 15 pounds. It features a flywheel belt-drive system, offering adjustable resistance via a | - 4-Wheel Dolly for Smooth Tabletop Shots
- Straight, Curved, or Circular Motion
- For Table Top/Flat Surfaces
- Supports up to 22 Pounds
Adding camera movement in tight spaces can require a huge overhead rig and specialized optics. But with the E-Image Cinema Skater - 4 Wheel Camera Dolly you can bring straight line or curved camera movement to table top set ups. | E-Image ES50 Slider with 29.1" Sliding Range- 29 inches of travel in a 20 inch long slider
- Can be used on any flat surface or mounted to a tripod
- Perfect for shooters who require maximum use with minimal size and weight
- Includes durable travel caseSpecifications
- Sliding Range of Tripod: 29
| - Dual 75/100mm Bowl
- For Select E-Image Tripod Heads
- Aluminum Alloy Construction
- Load Capacity of 110 lb
- Weighs 7 lb
- Height Range 15" to 28"
- Dual Spiked Feet
| - Very compact while folded for increased portability
- The base with fluid cartridge gives you a smooth pan action
- The fluid cartridge can be detached to make a mini tripod
|
| Content | Adding camera movement in tight spaces can require a huge overhead rig and specialized optics. But with the E-Image Cinema Skate Dolly Kit Ei-A24cl ( El-A24+El-A28 ) you can bring straight line or curved camera movement to table top set ups.The unit features adjustable axles, allowing you to adjust the path of the dolly. And also it supports up to 22 pounds of camera and head allowing you a wide choice in choosing the camera system you need.The E-Image Cinema Skate Dolly Kit Ei-A24cl ( El-A24+El-A28 ) wheels feature index marks. So you can match your adjustments creating a smooth curved table top dolly shot with no sideways drag. Each corner of the dolly features a 1/4"-20 tapped hole for mounting accessories, and the dolly includes both a 1/4"-20 mounting screw. And also a 1/4"-20 to 3/8"16 adapter for mounting heads, riser blocks, or cameras to the dolly.- 4-wheel mini dolly for fluid motion shots in straight lines, curves, and also wide circles
- Can be used tabletop or on any flat surface
- Stainless steel ball bearings encased in 60mm wheels enable smooth motion
- Scale markings for adjusting and aligning the wheel axles to desired position
- Four 1/4"-20 threaded holes for attaching accessories
| Create cinematic camera movements with the ES-120 48" Carbon Fiber Slider from E-Image. The slider may be used in multiple modes of operation and also can support up to 15 pounds. It features a flywheel belt-drive system, offering adjustable resistance via a squeeze mechanism at the top of the flywheel.There's an included crank that can used the traditional way upon removal of the flywheel. For tripod and also stand usage, there are standard 1/4"-20 and 3/8"-16 threads on the bottom as well as a 5/8" stand mount receiver on each end.The included outrigger feet are individually adjustable for leveling the slider evenly on different surfaces. The camera mounting platform is a large 5 x 5" and has a bubble level, and also the tripod mount plate (underneath the rails) is 5 x 6", for sturdier tripod mounting. The slider also supports an optional motion-control accessory that will let you take advantage of the smooth belt drive for time-lapse shooting.Key Features- 48" slider supporting up to 15 lb payloads
- Flywheel belt-drive system
- Adjustable resistance
- 1/4"-20 and 3/8"-16 tripod threads
- 5/8" stand mount receivers for C-stands and also baby stands
- Individually adjustable outrigger feet
- 5 x 5" mounting surface with a bubble level
- Supports optional motion control accessory
- Sealed-bearing wheel design
- 12 sealed bearings help smoothly distribute weight and also minimize movement tolerances
- Adjustable rollers help minimize lateral movement for heavier rigs
| Adding camera movement in tight spaces can require a huge overhead rig and specialized optics. But with the E-Image Cinema Skater EI-A24 - 4 Wheel Camera Dolly you can bring straight line or curved camera movement to table top set ups.The unit features adjustable axles, allowing you to adjust the path of the dolly. And it supports up to 22 pounds of camera and head allowing you a wide choice in choosing the camera system you need.The E-Image Cinema Skater EI-A24 - 4 Wheel Camera Dolly feature index marks. So you can match your adjustments creating a smooth curved table top dolly shot with no sideways drag. Each corner of the dolly features a 1/4"-20 tapped hole for mounting accessories. The dolly includes both a 1/4"-20 mounting screw, and a 1/4"-20 to 3/8"16 adapter for mounting heads, riser blocks, or cameras to the dolly.- 4-wheel mini dolly for fluid motion shots in straight lines, curves, and also wide circles
- Can be used tabletop or on any flat surface
- Stainless steel ball bearings encased in 60mm wheels enable smooth motion
- Scale markings for adjusting and aligning the wheel axles to desired position
- Four 1/4"-20 threaded holes for attaching accessories
| The E-Image ES50 Slider with 29.1" Sliding Range uses a unique tracking mechanism that allows the rails of the slider to move with thecamera when mounted on a tripod. This gives the slider ?29.1" of sliding range in a unit that is only ?19.7" long.The very sophisticated bearing provides smooth and quiet movement.The unique dual rail system provides an easy to adjust and precise solution for slide tracking.Quick assemble and disassemble design offers compact use and easy to use functonality.100% high quality 16 layers carbon fiber of knitting technique which offers the best stability possible.Key Features:- Patented adjustable counterweight damping structure offers perfect stability for all purposes
- Precise CNC machined structure offers solid structure and smooth operation
- Unit equipped with high precision and top grade German gear drive belt unit
- Multiple 1/4, 3/8 mounting holes for light stands and tripod mounts
- Top grade Japanese silent bearing material
- Double slider range
| E-Image Mini Tripod EI-7501
The E-Image Short/Baby Tripod Legs with Combination 75/100 mm Bowl ?is an aluminum alloy tripod that incorporates a dual 75/100mm bowl accepting select 75/100mm E-Image fluid heads. You can also mount fluid heads from other manufacturer's that fit a 75/100mm half ball.However the shape of the half ball varies from manufacturer to manufacturer, so it is important to check for compatibility when using a head other than the GH03, GH06, GH08, GH10, GH15, or GH25.The legs support up to 110 pounds yet weigh only 7 pounds and are adjustable from 15" to 28". Each leg incorporates dual spiked feet for use on soft surfaces, and an included ground level spreader attaches to the tripod legs for use on hard surfaces.Each leg is individually adjustable, so you can compensate for uneven surfaces such as steps or rocky terrain. The included padded carry bag provides a good solution for storage and transport.These aluminum alloy baby legs have a load capacity of 110 lb.E-Image Mini Tripod EI-7501
The legs feature a dual-sized bowl that accepts both 75 and 100mm ball bases. The legs are designed to work with available E-Image GH03, GH06, GH08, GH10, GH15, or GH25 fluid heads but may work with other fluid heads with either a 75mm or 100mm ball base.The two section, single stage legs are equipped with rotating lever locks for a secure nonslip height adjustment.The legs feature a removable ground spreader and dual spiked feet for grip on soft or uneven surfaces when you wouldn't normally use the spreader, such as earth, sand, or rocky terrain.The dual spikes provide grip when shooting with the legs spread wide for low angle shots or with the legs in a more standard spread. The spreader is useful on hard surfaces, such as streets, sidewalks, and interior floors.The spreader is expandable for increased stability and allows the legs to spread wide for low angle shots. |
E-IMAGE Monopod - MC110 very portable solution for smooth shooting with DSLR. Mini-DV, and HDV Cameras while in limited spacesThe new E-Image monopod series is a portable solution for smooth shooting with DSLR. Mini-DV and HDV cameras in limited spaces. It is perfectly use for on the move shooting and is smoother and easier than a handled camcorder.This creatively design monopod incorporates a fluid cartridge in the base for smooth pans and has three retractable feet for a firm footing on uneven ground. Photographers are able to stand as they were using a tripod but have the movement and freedom that comes with a monopod.Key Features:- Very compact while folded for increased portability
- The base with fluid cartridge gives you a smooth pan action
- The fluid cartridge can detached to make a mini tripod
|
