| Description | The Mini Converter Analog to SDI from Blackmagic will accept an HD/SD component, NTSC, PAL, or S-video signal and convert it to an SDI output. You can also choose to embed SDI audio from balanced AES/EBU or analog audio inputs. Use this device to convert video from Betacam SP, VHS, set-top boxes, HDV cameras, and other similar devices. | >Model: HDLEXT-DVI- SD/HD SDI
- 3GB/s SDI Technology
- USB Powered
Now you can route your computer monitor via your SDI router! The ?Blackmagic HDLEXT-DVI DVI Extender ?lets you can extend the DVI-D connection to your computer monitor via simple SDI cables! Now it's much easier to connect your computer displays anywhere in | - Converts an HDMI Input to 2 SDI Outputs
- Allows Use of Longer-Distance SDI Cables
- Both the In and Outs Support 1080p60 HD
- Supports HDMI and SDI Embedded Audio
- Built-In Rechargeable Battery
- AC Power Supply Included
- Features Battery Toggle Switch
| - Communicate with up to 8 Cameras
- 8 x SDI I/O
- Camera Talkback via XLR, Mini
- Fits in 1 Standard Rack Unit
With 12G-SDI, ?Blackmagic Design's ?ATEM Talkback Converter 4K ?accepts high-resolution video from up to eight studio cameras or ATEM Camera Converters and allows the control room to interact with the camera operators. The 12G-SDI connections can support video | - Enables Extension of SDI/HDMI Cameras
- Transmission Distance - 28 miles (45km)
- Internal Battery
- Talkback Function
The ?Blackmagic Design ATEM Camera Converter ?enables extension of SDI (serial digital interface) / HDMI cameras to distances up to 28 miles (45km) via an optical fiber link. You can connect your camera to the SDI/HDMI inputs to convert videos to optical signals. This optical | >Model: SWTALGPI8- Displays Tallies for Video Signals
- Indicates On-air Status
- For ATEM Switchers / Videohub Routers
- 8 Contact Closure Inputs & Outputs
The ?Blackmagic Design GPI & Tally Interface for ATEM Production Switchers ?is designed to display tallies to indicate the on-air status of video signals. It features 8 contact closure inputs and 8 contact closure outputs for connecting to ATEM switchers and Videohub |
| Content | The ?Mini Converter Analog to SDI ?from ?Blackmagic ?will accept an HD/SD component, NTSC, PAL, or S-video signal and convert it to an SDI output. You can also choose to embed SDI audio from balanced AES/EBU or analog audio inputs. Use this device to convert video from Betacam SP, VHS, set-top boxes, HDV cameras, and other similar devices.Analog to SDI ConversionUse this device to convert analog video sources to SDI video output.Embedded AudioThis unit can embed SDI audio from balanced AES/EBU or analog audio inputs. | >Model: HDLEXT-DVINow you can route your computer monitor via your SDI router! The ?Blackmagic HDLEXT-DVI DVI Extender ?lets you can extend the DVI-D connection to your computer monitor via simple SDI cables! Now it's much easier to connect your computer displays anywhere in your facility, or even to more than one monitor when using any 3 Gb/s SDI router. DVI Extender also works as a regular DVI to SD/HD-SDI video converter, that's perfect for broadcast graphics!Route Your Computer MonitorImagine the creative freedom to design your facility the way you want! Now you can move noisy computers out of client rooms plus you can even have a duplicate computer monitor for your client to watch! DVI Extender is easy to use and plugs into an HDLink Pro or HDLink Optical Fiber converter at the other end of the monitor extension. This means you can use a single monitor for either computer or video monitoring!Built in SDI Audio EmbeddingDVI Extender includes a standard 3.5mm audio mini jack input so you can connect audio from your computer! That means you get full 3D accelerated graphics and audio from your computer to SDI. That's a perfect solution for digital signage, Flash playback, PowerPoint, gaming and more! Now any software can be output to crystal clear SDI video!Convert DVI to SDI VideoWith DVI Extender, you can harness your computer's built in 3D accelerated display to create realtime broadcast graphics in standard definition and high definition video. Simply set the control panel to Video Output and DVI extender will output NTSC, PAL, or 1080 HD resolution SDI video with embedded audio from your computer via the audio input jack.Advanced 3 Gb/s SDI TechnologyThe latest 3 Gb/s SDI technology is built into DVI Extender, making it fully compatible with all of your SD and HD-SDI equipment. With 3 Gb/s SDI you know that DVI Extender will be fully compatible with new video formats in the future! Adding new formats is easy, as they can be loaded via DVI Extender's USB connection.Full Digital QualityUnlike older scan converters, DVI Extender is a fully digital converter that connects the DVI-D output on your computer to SDI equipment such as HDLink Pro. That's a direct pixel-for-pixel digital connection to SDI, which is the highest quality possible and eliminates all scaling problems!Powers From Any USB PortDVI Extender does not need messy power supplies because it connects directly to any USB port on your computer. That's ideal for portable use, because DVI Extender can be powered directly from your laptop. Or you could even use a portable iPod USB power supply | The ?Blackmagic-Design HDMI to SDI Battery Converter ?converts an HDMI input to up to two SDI outputs. The outputs automatically match and output in the quality of the HDMI input, whether HD or SD; whatever comes in is what automatically goes out. Both the HDMI and SDI connections support up to 1080p60 HD, which on the SDI side is equivalent to 3G. The converter also supports embedded audio on both the in and outs.One reason for converting to SDI is to take advantage of the longer distance that SDI cables can carry a signal. If your camera has an HDMI output, this converter will let you instead output by SDI, allowing professional connectivity on location.Power is supplied by a built-in lithium-ion polymer rechargeable battery that allows on location work without external power, and an AC power supply is additionally also included.Sophisticated Conversion- Converts an HDMI input to up to 2 low-jitter SDI outputs
- Conversion allows the use of longer professional SDI cables
- The SDI outs auto-match the SD / HD quality of the HDMI input
- Both the HDMI and the SDI connections support up to1080p60 HD
- Audio embedded on the HDMI in goes out embedded on the SDI outs
Battery and/or Adapter Power- A built-in battery provides more than 2 hours of charge
- The battery can be recharged while the converter is in use
- A toggle switch allows you use the battery only when needed
- An LED indicator displays what the charge level of the battery is
- An adapter is included for external power and to charge the battery
Super Tough Design- Machined of aircraft grade aluminum
- Can be run over by a truck and still work
- Small enough to fit into the palm of a hand
- Scratch-resistant labels / non-slip rubber feet
| With 12G-SDI, ?Blackmagic Design's ?ATEM Talkback Converter 4K ?accepts high-resolution video from up to eight studio cameras or ATEM Camera Converters and allows the control room to interact with the camera operators. The 12G-SDI connections can support video with resolutions up to 4096 x 2160 at 60 fps and rout those individual signals to a switcher via SDI outputs, to a program monitor via its own SDI output, and back to the camera operator while carrying talkback audio over a single cable. Talkback audio can be captured via a microphone plugged into the XLR jack on the front, or a headset mic plugged into the appropriate jack, also on the front panel.This unit can be upgraded to accept fiber optic connections, which carry, bi-directional 4K video, audio, and talkback for up to 28 miles without signal degradation. And because of its 1 RU size, it can easily fit into industry standard rack-mount equipment and furniture.Optional Optical Fiber ConnectorsThe ATEM Talkback Converter 4K can be upgraded to use standard single mode optical fiber cable with standard LC connectors to allow you to transmit SD and HD video signals up to 28 miles away. Standard copper wire SDI cables have a limit of several hundred feet before the signal breaks up, converting the SDI signal to optical, and sending it along optical cable greatly increases the distance of your cable runs.Talkback and TallyThe unit features a built-in speaker and mic inputs, as well as a headphone jack for when you need privacy, or the area is too loud. When connected to the ATEM Camera Converter without needing to worry about walkie talkies. Using the talkback feature, the unit uses audio channels 15 and 16 of the SDI stream for talkback communication.
Camera operators can be selected individually if desired, and communication can be controlled by a push button, or locked open. Mute and un-mute buttons on the front of the unit allow you to control who hears what.The unit passes SDI Tally signal information back to the cameras along with any SDI Program signal from available switchers.Precision Signal ProcessingThe unit features chips that use 10-bit processing, and are switchable between SD and HD, for a clean signal.
The unit features eight independent simultaneous SDI to optical and optical to SDI converters (with the optional fiber terminals), when used in conjunction with the ATEM Camera Converter the unit can also be used as four independent SDI or Fiber to HDMI converters. | The ?Blackmagic Design ATEM Camera Converter ?enables extension of SDI (serial digital interface) / HDMI cameras to distances up to 28 miles (45km) via an optical fiber link. You can connect your camera to the SDI/HDMI inputs to convert videos to optical signals. This optical fiber input can be connected to the switcher program feed to convert to SDI/HDMI outputs for monitoring. In addition, the SDI/HDMI outputs can be switched between return program and camera input for monitoring.With an internal battery, the converter can be used at remote locations when the cameras are placed at far-off locations. Featured Talkback function allows the switcher operator to co-ordinate with camera operator via PC headsets or iPhone-compatible headphones. By embedding microphone audio into channels 15 and 16 of the camera optical fiber video output, the Talkback function listens to channels 15 and 16 of the optical fiber input on the headphones.Using the 12V power connection, the converter can be connected to any power source or a car battery. By connecting the switcher? s program output to the ATEM Camera Converter via optical outputs, the camera converter illuminates the 2 tally LEDs using open standard tally packet in the SDI output. You can select the camera number using the USB software or by camera number button on the keypad. In addition, you can also view red color tally on the monitor by connecting external monitoring to the HDMI/SDI outputs.Featuring an integrated belt clip, the camera converter can be attached to the belt for portability. With the help of a camera mount, the converter can be mounted onto a tripod. In addition, the camera converter features microphone inputs for audio capability.Made of aircraft-grade aluminum, the camera converter can withstand bumps and shocks without breaking. Built-in button pad allows you to control power, microphone level, talkback and video, and battery indicators. You can update converters firmware via a USB port. The camera converter can be used for applications such as concerts, sporting events, lecture theaters, houses of worship, surveillance, or any remote camera location..- Enables extension of SDI (serial digital interface) / HDMI cameras to distances up to 28 miles (45km) via optical fiber link
- You can connect your camera to the SDI/HDMI inputs to convert videos to optical signals
- Optical fiber input can be connected to the switcher program feed to convert to SDI/HDMI outputs for monitoring
- SDI/HDMI outputs can be switched between return program and camera input for monitoring
- Includes an internal battery
- Can be used at remote locations when the cameras are placed at far-off locations
- Featured Talkback function allows the switcher operator to co-ordinate with camera operator via PC headsets or iPhone-compatible headphones
- Talkback function listens to channels 15 and 16 of the optical fiber input on the headphones by embedding microphone audio into channels 15 and 16 of the camera optical fiber video output
- Can be connected to any power source or a car battery using the 12V power connection
- Illuminates the 2 tally LEDs using open standard tally packet in the SDI output by connecting the switcher's program output to the ATEM Camera Converter via optical outputs
- You can select the camera number using the USB software or by camera number button on the keypad
- You can view red color tally on the monitor by connecting external monitoring to the HDMI/SDI outputs
- Features an integrated belt clip
- Can be attached to the belt for portability
- Can be mounted onto a tripod with the help of a camera mount
- Features microphone inputs for audio capability
- Made of aircraft-grade aluminum
- Can withstand bumps and shocks without breaking
- Built-in button pad allows you to control power, microphone level, talkback and video, and battery indicators
- You can update converters firmware via a USB port
- Can be used for applications such as concerts, sporting events, lecture theaters, houses of worship, surveillance, or any remote camera location
| >Model: SWTALGPI8The ?Blackmagic Design GPI & Tally Interface for ATEM Production Switchers ?is designed to display tallies to indicate the on-air status of video signals. It features 8 contact closure inputs and 8 contact closure outputs for connecting to ATEM switchers and Videohub routers for operation. Additionally, the GPI & Tally Interface can be used with multiple interfaces to increase the number of inputs and outputs.- Displays tallies for indicating the on-air status of video signals
- 8 contact closure inputs & 8 contact closure outputs
- Compatible with ATEM switchers and Videohub routers
- Connect to multiple interfaces offering enhance flexibility in operation
|
