| Description | The Mini Converter Analog to SDI from Blackmagic will accept an HD/SD component, NTSC, PAL, or S-video signal and convert it to an SDI output. You can also choose to embed SDI audio from balanced AES/EBU or analog audio inputs. Use this device to convert video from Betacam SP, VHS, set-top boxes, HDV cameras, and other similar devices. | >Model: CONVCMIC/HS- HDMI Input
- 2 x SDI Outputs
- Supports SD and HD Signals
- Automatic Input Signal Detection
With the ?Blackmagic Design HDMI to SDI Micro Converter ?you can convert a single high-definition HDMI signal into two 3G-SDI signals for ensuring workflow compatibility in professional video environments. Input signals are detected automatically, so the | - Converts an HDMI Input to 2 SDI Outputs
- Allows Use of Longer-Distance SDI Cables
- Both the In and Outs Support 1080p60 HD
- Supports HDMI and SDI Embedded Audio
- Built-In Rechargeable Battery
- AC Power Supply Included
- Features Battery Toggle Switch
| >Model: MultiView 4- 4x 6G-SDI Inputs with Loop Outputs
- 1x SDI & 1x HDMI MultiView Outputs
- Supports SD, HD, UHD 4K, DCI 4K
- Independent Inputs Allow Mixing Formats
The ?Blackmagic Design MultiView 4 ?features four 10-bit 6G-SDI inputs that let you monitor SD, HD, or 4K sources in any combination on Ultra HD monitors or TVs. This lets you take advantage of high resolution displays to view each source with | - 4 Bidirectional Converters in 1 RU Unit
- Optical Fiber Signal Range 28 Miles
- Connects up to 4 ATEM Camera Converters
- 4 x Fiber to SDI 10-bit Converters
The ?Blackmagic Design Studio Converter 2 ?inputs video signals transmitted over optical fiber and converts the signals to SDI for use with video switchers. When used in conjunction with the Blackmagic Design ATEM Camera Converter, you can send video signals up to 28 | Model: HYPERD/ST/12G- Records Up to 3840 x 2160 at 60 fps
- Plays Back Up to 3840 x 2160 at 60 fps
- 12G-SDI and HDMI 2.0 Inputs
- 1 HDMI and 4 12G-SDI Outputs
UHD 4K playback and recording at up to 60p is introduced with the ?Blackmagic Design HyperDeck Studio 12G. This file-based deck provides the familiar jog/shuttle interface of traditional VTRs, but instead of tape use SSD drives for recording media. It records in |
| Content | The ?Mini Converter Analog to SDI ?from ?Blackmagic ?will accept an HD/SD component, NTSC, PAL, or S-video signal and convert it to an SDI output. You can also choose to embed SDI audio from balanced AES/EBU or analog audio inputs. Use this device to convert video from Betacam SP, VHS, set-top boxes, HDV cameras, and other similar devices.Analog to SDI ConversionUse this device to convert analog video sources to SDI video output.Embedded AudioThis unit can embed SDI audio from balanced AES/EBU or analog audio inputs. | >Model: CONVCMIC/HS
With the ?Blackmagic Design HDMI to SDI Micro Converter ?you can convert a single high-definition HDMI signal into two 3G-SDI signals for ensuring workflow compatibility in professional video environments. Input signals are detected automatically, so the converter knows the resolution and format to output. | The ?Blackmagic-Design HDMI to SDI Battery Converter ?converts an HDMI input to up to two SDI outputs. The outputs automatically match and output in the quality of the HDMI input, whether HD or SD; whatever comes in is what automatically goes out. Both the HDMI and SDI connections support up to 1080p60 HD, which on the SDI side is equivalent to 3G. The converter also supports embedded audio on both the in and outs.One reason for converting to SDI is to take advantage of the longer distance that SDI cables can carry a signal. If your camera has an HDMI output, this converter will let you instead output by SDI, allowing professional connectivity on location.Power is supplied by a built-in lithium-ion polymer rechargeable battery that allows on location work without external power, and an AC power supply is additionally also included.Sophisticated Conversion- Converts an HDMI input to up to 2 low-jitter SDI outputs
- Conversion allows the use of longer professional SDI cables
- The SDI outs auto-match the SD / HD quality of the HDMI input
- Both the HDMI and the SDI connections support up to1080p60 HD
- Audio embedded on the HDMI in goes out embedded on the SDI outs
Battery and/or Adapter Power- A built-in battery provides more than 2 hours of charge
- The battery can be recharged while the converter is in use
- A toggle switch allows you use the battery only when needed
- An LED indicator displays what the charge level of the battery is
- An adapter is included for external power and to charge the battery
Super Tough Design- Machined of aircraft grade aluminum
- Can be run over by a truck and still work
- Small enough to fit into the palm of a hand
- Scratch-resistant labels / non-slip rubber feet
| >Model: MultiView 4The ?Blackmagic Design MultiView 4 ?features four 10-bit 6G-SDI inputs that let you monitor SD, HD, or 4K sources in any combination on Ultra HD monitors or TVs. This lets you take advantage of high resolution displays to view each source with increased clarity. The MultiView 4 allows for 2x2 display with each input fully re-synchronized. One 6G-SDI output and one HDMI multi-view output are provided, as well as a loop output for each 6G-SDI input for passing the signals to additional devices.Housed in a 1 RU machined aluminum frame, the MultiView 4 is ready for use in the studio, broadcast truck, or even on location. It can be controlled with the included control software via the Ethernet port or by an optional Teranex front panel (not included). For easy integration into any facility, a built-in multi-voltage power supply supports 90 to 240 VAC, or you can power the unit by 48 VDC PoE+.Note: ?IEC power cable is not included.- Native Ultra HD multi-view output
- 4x 6G-SDI inputs; accepts SD, HD, Ultra HD, and DCI 4K signals
- Supports Ultra HD 4K (3840x2160) up to 30p; DCI 4K (4096x2160) at 24p
- 1x 6G-SDI and 1x HDMI multi-view outputs
- 4x SDI loop outputs
- 2x2 multi-view configurations
- 2-channel audio meters for each view
- 16x9 SD support
- Tally support with ATEM switchers via optional Teranex Mini Smart Panel
- 1 RU machined aluminum chassis
- Software control over Ethernet; supports Videohub router protocol
- Built-in 90 to 240 VAC power supply
- IEC power cable required
- Supports PoE+ 48 VDC
| The ?Blackmagic Design Studio Converter 2 ?inputs video signals transmitted over optical fiber and converts the signals to SDI for use with video switchers. When used in conjunction with the Blackmagic Design ATEM Camera Converter, you can send video signals up to 28 miles between camera and switcher using available optical fiber cables. By comparison, sending an HD-SDI signal over traditional copper cable is usually limited to about 300 feet, depending on the quality of the cable.A typical set up using the Studio Converter 2 is to connect it between the switcher and up to four ATEM Camera Converter units. This setup allows the Converter 2 to receive the signals from the fiber cable, convert the signals to SDI using 10-bit processing, and send the signals to the switcher. The Converter 2 supports SD/HD signals, and when using the available ATEM Camera Converter you can use any camera with an SDI/HDMI output.The Converter 2 can also be used as 4 independent simultaneous bidirectional SD/HD-SDI to optical converters. The Converter 2 features a built-in mic input, speaker and headphone jack that provides talkback audio for communicating with camera operators. The Converter 2 passes tally signals embedded in the SDI program stream. You can cascade multiple ATEM Studio Converter 2 units together when using more than 4 cameras. The Studio Converter 2 features a 1 RU design with built in rackmount ears for easy integration into existing studio configurations or production cases.Optical Fiber ConnectorsThe ATEM Studio Converter 2 uses standard single mode optical fiber cable with standard LC connectors to allow you to transmit SD and HD video signals up to 28 miles away. Standard copper wire SDI cables have a limit of several hundred feet before the signal breaks up, converting the SDI signal to optical, and sending it along optical cable greatly increases the distance of your cable runs.Talkback and TallyThe unit features a built-in speaker and mic inputs, as well as a headphone jack for when you need privacy, or if the area is too loud. When connected to the ATEM Camera Converter, you can talk to your camera operators no matter how far away they are, without needing to worry about walkie talkies. Using the talkback feature, the unit uses audio channels 15 and 16 of the SDI stream for talkback communication.
Camera operators can be selected individually if desired, and communication can be controlled by a push button, or locked open. Mute and un-mute buttons on the front of the unit allows you to control who hears what.
The unit passes SDI Tally signal information back to the cameras along with any SDI Program signal from available switchers.Multiple UnitsEach ATEM Studio Converter 2 connects to up to four ATEM Camera Converter units, allowing you to communicate with up to four camera operators at a time. Multiple Studio Converter 2 units can be cascaded together when more than 4 cameras are needed.Precision Signal ProcessingThe unit features chips that use 10-bit processing, and are switchable between SD and HD, for a clean signal.
The unit features four independent simultaneous SDI to optical and optical to SDI converters
When used in conjunction with the ATEM Camera Converter the unit can also be used as four independent SDI or Fiber to HDMI converters | Model: HYPERD/ST/12GUHD 4K playback and recording at up to 60p is introduced with the ?Blackmagic Design HyperDeck Studio 12G. This file-based deck provides the familiar jog/shuttle interface of traditional VTRs, but instead of tape use SSD drives for recording media. It records in uncompressed QuickTime, ProRes, or Avid DNxHD formats all with up to 4:2:2 color sampling at 10-bit color space. With two SSD slots, you can record almost endlessly - as one SSD becomes full, recording automatically continues on to the other. The Studio 12G features one 12G-SDI input that is 3G-, HD-, and SD-SDI compatible along with one HDMI 2.0 input. In addition, there are four total SDI outputs and one HDMI 2.0 output for monitoring and connection to other equipment in your studio. All of the SDI connectors plus both of the HDMI ports support UHD 4K (3840 x 2160) at up to 60 fps.The Studio 12G is housed in a 1RU rackmountable unit, with built-in rackmount ears. It features illuminated front panel button control and a jog/shuttle wheel for analog scrubbing. RS-422 control is supported for external control. You can also control the unit using either the USB port or over Ethernet via the RJ-45 connector. An integrated LCD on the front panel allows you to monitor the video, and display timecode and transport information.UHD 4K Recording and PlaybackThe HypeDeck Studio 12G records video to uncompressed QuickTime at 10-bit with 4:2:2 color sampling at up to UHD 4K (3840 x 2160) at 60 fps. It also records to ProRes 422(HQ), ProRes 422, ProRes 422 (LT), ProRes 422 (Proxy), as well as Avid DNxHD and Avid DNxHD MXF, also all in SD and SDTwo SSD BaysFor accepting storage media, the unit incorporates two 2.5" slots with SATA connectors for use with SSD drives. The ability to swap out drives while recording enables almost endlessly durations, seamlessly switching from one SSD to the other as the first one fills up.Video InputsThe HyperDeck Studio 12G supports SD, HD, 3G, 6G, and 12G signals over SDI and up to UHD 4K at 60p via HDMI 2.0.Video OutputsA total of four SDI outputs are provided: a single loop-out that mirrors the incoming signal, two playback outputs, and a dedicated monitor output. Additionally, there is a single HDMI 2.0 output with UHD 4K at 60p support that can serve as a loop-out, be used for playback, or connected to a local monitorVTR Style ControlsThe HyperDeck Studio 12G features VTR style front panel controls for record and playback. With illuminated buttons, for working in dim locations or settings, while a built-in jog/shuttle wheel provides analog style control over your playback.RemoteThe unit is controllable via RS-422 control and over the Ethernet or USB port.Built-In LCD MonitorThe unit's front panel also features a built-in LCD screen that allows you to monitor input or playback video as well as timecode, format, and audio levels.Included SoftwareThe HyperDeck Studio 12G includes HyperDeck Utility, Media Express, Disk Speed test, Blackmagic System Preferences, and Blackmagic driver software. |
