| Description | - Converts an HDMI Input to 2 SDI Outputs
- Allows Use of Longer-Distance SDI Cables
- Both the In and Outs Support 1080p60 HD
- Supports HDMI and SDI Embedded Audio
- Built-In Rechargeable Battery
- AC Power Supply Included
- Features Battery Toggle Switch
| - Communicate with up to 8 Cameras
- 8 x SDI I/O
- Camera Talkback via XLR, Mini
- Fits in 1 Standard Rack Unit
With 12G-SDI, ?Blackmagic Design's ?ATEM Talkback Converter 4K ?accepts high-resolution video from up to eight studio cameras or ATEM Camera Converters and allows the control room to interact with the camera operators. The 12G-SDI connections can support video | - Single Link SD/HD/3G/6G-SDI Input
- 8x Single Link SD/HD/3G/6G-SDI Outputs
- Re-Clocked Outputs
- Supports SD, HD, UHD 4K & DCI 4K Signals
The ?Mini Converter SDI Distribution 4K ?from ?Blackmagic Design ?allows you to distribute a Single Link SD/HD/3G/6G-SDI signal to eight SDI devices simultaneously. It automatically detects the input signal type, re-clocks it, and its eight outputs automatically match the | >Model: CONVMBHS24K6G- 4K HDMI Input
- 2 x 6G-SDI Outputs
- Supports SD, HD, UHD 4K & DCI 4K Signals
- Automatic Input Signal Detection
The Blackmagic Design HDMI to SDI 6G Mini Converter converts HDMI to SD, HD, 3G, or 6G-SDI in resolutions up to DCI 4K (4096 x 2160) at 24p and UHD 4K (3840 x 2160) up to 30p. This is useful for connecting consumer devices that output HDMI signals with | Model: CONVMASA
The Mini Converter SDI to Analog from Blackmagic will accept an SDI input signal and convert it to HD/SD component, NTSC, PAL, or S-video output. Also, if your SDI signal has audio embedded, the Converter will let you first de-embed the audio so that you can output it via the analog outs. | The ?Blackmagic Design PS-OG3 OpenGear Redundant Power Supply Unit ?is designed for use with the OpenGear Converters. |
| Content | The ?Blackmagic-Design HDMI to SDI Battery Converter ?converts an HDMI input to up to two SDI outputs. The outputs automatically match and output in the quality of the HDMI input, whether HD or SD; whatever comes in is what automatically goes out. Both the HDMI and SDI connections support up to 1080p60 HD, which on the SDI side is equivalent to 3G. The converter also supports embedded audio on both the in and outs.One reason for converting to SDI is to take advantage of the longer distance that SDI cables can carry a signal. If your camera has an HDMI output, this converter will let you instead output by SDI, allowing professional connectivity on location.Power is supplied by a built-in lithium-ion polymer rechargeable battery that allows on location work without external power, and an AC power supply is additionally also included.Sophisticated Conversion- Converts an HDMI input to up to 2 low-jitter SDI outputs
- Conversion allows the use of longer professional SDI cables
- The SDI outs auto-match the SD / HD quality of the HDMI input
- Both the HDMI and the SDI connections support up to1080p60 HD
- Audio embedded on the HDMI in goes out embedded on the SDI outs
Battery and/or Adapter Power- A built-in battery provides more than 2 hours of charge
- The battery can be recharged while the converter is in use
- A toggle switch allows you use the battery only when needed
- An LED indicator displays what the charge level of the battery is
- An adapter is included for external power and to charge the battery
Super Tough Design- Machined of aircraft grade aluminum
- Can be run over by a truck and still work
- Small enough to fit into the palm of a hand
- Scratch-resistant labels / non-slip rubber feet
| With 12G-SDI, ?Blackmagic Design's ?ATEM Talkback Converter 4K ?accepts high-resolution video from up to eight studio cameras or ATEM Camera Converters and allows the control room to interact with the camera operators. The 12G-SDI connections can support video with resolutions up to 4096 x 2160 at 60 fps and rout those individual signals to a switcher via SDI outputs, to a program monitor via its own SDI output, and back to the camera operator while carrying talkback audio over a single cable. Talkback audio can be captured via a microphone plugged into the XLR jack on the front, or a headset mic plugged into the appropriate jack, also on the front panel.This unit can be upgraded to accept fiber optic connections, which carry, bi-directional 4K video, audio, and talkback for up to 28 miles without signal degradation. And because of its 1 RU size, it can easily fit into industry standard rack-mount equipment and furniture.Optional Optical Fiber ConnectorsThe ATEM Talkback Converter 4K can be upgraded to use standard single mode optical fiber cable with standard LC connectors to allow you to transmit SD and HD video signals up to 28 miles away. Standard copper wire SDI cables have a limit of several hundred feet before the signal breaks up, converting the SDI signal to optical, and sending it along optical cable greatly increases the distance of your cable runs.Talkback and TallyThe unit features a built-in speaker and mic inputs, as well as a headphone jack for when you need privacy, or the area is too loud. When connected to the ATEM Camera Converter without needing to worry about walkie talkies. Using the talkback feature, the unit uses audio channels 15 and 16 of the SDI stream for talkback communication.
Camera operators can be selected individually if desired, and communication can be controlled by a push button, or locked open. Mute and un-mute buttons on the front of the unit allow you to control who hears what.The unit passes SDI Tally signal information back to the cameras along with any SDI Program signal from available switchers.Precision Signal ProcessingThe unit features chips that use 10-bit processing, and are switchable between SD and HD, for a clean signal.
The unit features eight independent simultaneous SDI to optical and optical to SDI converters (with the optional fiber terminals), when used in conjunction with the ATEM Camera Converter the unit can also be used as four independent SDI or Fiber to HDMI converters. | The ?Mini Converter SDI Distribution 4K ?from ?Blackmagic Design ?allows you to distribute a Single Link SD/HD/3G/6G-SDI signal to eight SDI devices simultaneously. It automatically detects the input signal type, re-clocks it, and its eight outputs automatically match the SDI input video format. With a compact form factor and easy-to-use controls, the Mini Converter is ideal for a variety of broadcast, post production, and professional AV applications.Using 6G-SDI technology, the Mini Converter supports resolutions up to Ultra HD 4K (3840 x 2160) at up to 30 fps and DCI 4K (4096 x 2160) at 24 fps, as well as SD, HD, and 3G-SDI signals. It supports all SDI-related transmission features, including embedded audio, ancillary data, and even handles ASI signals - asynchronous signals that carry multiple compressed programs that can be at varying transmission speeds. The Mini Converter's settings are controlled using the built-in DIP switches or via USB using the included software for Max OS X or Windows computers. The USB port also enables the firmware to be updated. For powering the device, a 12V power supply is included with international socket adapters.Additional Features- 4:2:2 and 4:4:4 sampling and color precision
- 24-bit, 48 kHz audio sampling
- Compliant with SMPTE 259M, SMPTE 292M, SMPTE 296M, SMPTE 372M, and SMPTE 425M standards
| Model: CONVMBHS24K6GThe Blackmagic Design HDMI to SDI 6G Mini Converter converts HDMI to SD, HD, 3G, or 6G-SDI in resolutions up to DCI 4K (4096 x 2160) at 24p and UHD 4K (3840 x 2160) up to 30p. This is useful for connecting consumer devices that output HDMI signals with professional SDI video equipment. With a compact form factor and easy-to-use controls, the Mini Converter is ideal for a variety of broadcast, post-production, and professional AV applications.Using 4K HDMI and 6G-SDI technologies, the Mini Converter automatically detects the input video format and instantly changes between SD, HD, and UHD/DCI 4K formats. The two 6G-SDI outputs also support SD and HD-SDI signals for integration into existing workflows. Both 6G-SDI outputs send duplicate signals. Audio is embedded in the SDI output from either the HDMI input or from the two 1/4" input jacks which support four channels of AES/EBU digital audio or two channels of analog audio.The Mini Converter's settings are controlled using the built-in switches or via USB using the control software for Max OS X or Windows computers, which can be downloaded on Blackmagic Design's website. The USB port also enables the firmware to be updated.The device is powered by an included 12V power supply and includes international socket adapters.Additional Features- 4:2:2 Sampling and color precision
- HD scaler and SD down-conversion
- 24-bit, 48 kHz audio sampling
- Compliant with SMPTE 259M/292M/296M/372M/424M/425M Level A or B/SMPTE ST-2081, and ITU-R BT.656/BT.601 standards
| Model: CONVMASAThe Mini Converter SDI to Analog from Blackmagic will accept an SDI input signal and convert it to HD/SD component, NTSC, PAL, or S-video output. Also, if your SDI signal has audio embedded, the Converter will let you first de-embed the audio so that you can output it via the analog outs.SDI to Analog ConversionUse this device to convert SDI video signals to analog output.Embedded AudioThe Converter can de-embed audio from an SDI signal so that you can output it via the analog outs. | The ?Blackmagic Design PS-OG3 OpenGear Redundant Power Supply Unit ?is designed for use with the OpenGear Converters. |
