{"product_id":"tilta-nucleus-m-wireless-lens-control-system-partial-kit-iv","title":"Tilta Nucleus-M Wireless Lens Control System Partial Kit IV","description":"\\n\\n\\n\\nThe ?\u003cb\u003eTilta Nucleus-M Wireless Lens Control System Partial Kit IV\u003c\/b\u003e ?contains the essential elements for pulling focus and iris wirelessly. The kit includes the Nucleus-M FIZ hand unit controller, two Nucleus-M motors, two removable lens belts (DSLR Lens Follow Focus Adapters), two motor power cables, two marking disks for the hand unit, a lanyard for the hand unit, and a battery charger unit. The system enables an AC to pull focus and iris on a prime lens. If you are using a lens that does not have standard cine-style gears, then use the included lens belts to add gears to your lens.\\n\\nThis partial kit is a dual-axis system, typically controlling focus and iris, but the hand unit will allow you to control an additional motor (not included) for zoom control when using a zoom lens. The system can wirelessly pull focus from up to 1000' away, and the batteries can power the hand unit for approximately 10 hours on a single charge (batteries not included). The first motor is powered via the included D-Tap to 7-pin cable; the second motor daisy-chains to the fist via the 7-pin to 7-pin cable for power. The lanyard attaches to the hand control unit, allowing you to wear it around your neck.\\n\\n\\n\\n\\nNote:\\nPlease note that batteries are not included and must be sourced separately.\\n\\n\\n\\n\\nTilta Nucleus-M FIZ Hand Unit\\n\\n\\n\\nThe ?\u003cb\u003eTilta Nucleus-M FIZ Hand Unit\u003c\/b\u003e ?provides three-channel wireless focus, iris, and\/or zoom control as part of the Nucleus-M lens control system. The hand unit features a large wood-edged focus knob, a zoom joystick, an iris wheel, and a backlit LED display window.\\n\\nSelect from low, medium, and maximum transmission ranges to best suit your working distance and battery reserves. The Nucleus-M FIZ Hand Unit's choice of 15 2.4 GHz channels minimizes the chance of interference in high-traffic areas. Set up to 10 soft stops with vibration for focus pulls, and calibrate lenses automatically or manually.\\n\\nWireless run\/stop is available for select cameras using the hand unit and separately available cables. The hand unit is powered by two separately available lithium-ion batteries and can operate for up to 10 hours on a single charge.\\n\\n\\n\\n\\nNote:\\nPlease note that batteries are not included and must be sourced separately.\\n\\n\\n\\n \u0026gt;Features\\n\\n\\n\u003cul\u003e\\n \t\u003cli\u003e3-channel wireless lens control unit\u003c\/li\u003e\\n \t\u003cli\u003eControl focus, iris, and\/or zoom\u003c\/li\u003e\\n \t\u003cli\u003eShort-, medium-, and long-range transmission options\u003c\/li\u003e\\n \t\u003cli\u003e15-channel selection minimizes outside interference\u003c\/li\u003e\\n \t\u003cli\u003ePowered via two 18650 rechargeable lithium-ion batteries (not included)\u003c\/li\u003e\\n \t\u003cli\u003eUp to 10-hour runtime on a single charge\u003c\/li\u003e\\n \t\u003cli\u003eAmbidextrous design with large wood-edged knob\u003c\/li\u003e\\n\u003c\/ul\u003e\\n\\n\\n\\n\\n\\n\\n\\nTilta Nucleus-M FIZ Lens Control Motor\\n\\n\\n\\nThe compact ?\u003cb\u003eTilta Nucleus-M FIZ Lens Control Motor\u003c\/b\u003e ?features an integrated motor drive, eliminating the space of a separate drive box and enabling a quicker setup. Power the motor using a separately available D-Tap cable and power source, or daisy-chain to another motor using a 7-pin cable.\\n\\nThe Nucleus-M wireless motor includes a cine standard 0.8 Mod drive gear and a 19mm rod adapter with a bushing for mounting onto a 15mm rod. The motor features automatic or manual calibration, a display window, and high, medium, and low torque settings.\\n\\n\\n\\n\\n \u0026gt;Features\\n\\n\\n\u003cul\u003e\\n \t\u003cli\u003eBrushless motor with an integrated motor drive\u003c\/li\u003e\\n \t\u003cli\u003eCine-lens standard 0.8 Mod, 35-tooth, 32-pitch gear\u003c\/li\u003e\\n \t\u003cli\u003eMotor clamps onto 19mm or 15mm rods (with included bushing)\u003c\/li\u003e\\n \t\u003cli\u003ePower via separately available D-Tap cable or daisy-chain to additional motors\u003c\/li\u003e\\n \t\u003cli\u003eAutomatic and manual calibration\u003c\/li\u003e\\n \t\u003cli\u003eFor focus, iris, or zoom control\u003c\/li\u003e\\n \t\u003cli\u003eHigh, medium, and low torque settings\u003c\/li\u003e\\n \t\u003cli\u003eStatus display window\u003c\/li\u003e\\n\u003c\/ul\u003e\\n\\n\\n\\n\\n\\n\\n\\nTilta DSLR Lens Follow Focus Adapter\\n\\n\\n\\nUse this ?\u003cb\u003eDSLR Lens Follow Focus Adapter\u003c\/b\u003e ?from ?\u003cb\u003eTilta\u003c\/b\u003e to tie around your DSLR lens and control focus with any of Tilta's follow focus systems such as the Nucleus-Nano or Nucleus-M. The adjustable, zip tie-style adapter ring is made of silicone and plastic and ties around most DSLR lenses. The teeth lock into the follow focus motor's gear for smooth adjustments.\\n\\n\\n\\n\\n\\n\\nTilta Nucleus-M D-Tap to 7-Pin Motor Power Cable\\n\\n\\n\\nThis 23\" ?\u003cb\u003eNucleus-M D-Tap to 7-Pin Motor Power Cable\u003c\/b\u003e ?from ?\u003cb\u003eTilta\u003c\/b\u003e ?is designed to power your Nucleus-M lens control motor using a D-Tap power source.\\n\\nAfter powering one motor with this cable, other motors may be daisy-chained to each other.\\n\\n\\n\\n\\n\\n\\nTilta Nucleus-M Follow Focus Marking Disk\\n\\n\\n\\nThe ?\u003cb\u003eTilta Follow Focus Marking Disk\u003c\/b\u003e is compatible with the Nucleus-M FIZ hand unit. Use this white plastic disk for creating custom focus marks used for pulling focus.\\n\\n\\n\\n\\n\\n\\nTilta Lanyard for Nucleus-M FIZ Hand Unit\\n\\n\\n\\nThe ?\u003cb\u003eTilta Nucleus-M Lanyard\u003c\/b\u003e is compatible with the Nucleus-M FIZ control hand unit. Use this strap to carry the control unit around your neck or to drape it from a stand. Lanyard features include a swiveling quick release clip and a wide nylon strap.\\n\\n\\n\\n\\n\\n\\nTilta Nucleus-M Battery Charger\\n\\n\\n\\nThe ?\u003cb\u003eTilta Nucleus-M Battery Charger\u003c\/b\u003e ?can charge one to four batteries used in the handset and handles of the Nucleus-M wireless lens control system. This versatile charger can be powered using AC, 5V USB, or 12V vehicle power.\\n\\nCompatible with 18650 lithium-ion and select other batteries, the charger features LED status lights and spring-loading for a secure battery fit.\\n\\n\\n\\n\\n \u0026gt;Compatible Batteries\\n\\n26650, 22650\\n18650, 18490, 18350\\n17670, 17500\\n16340, 14500, 10400\\nRCR123\\nNiMH\/NiCd: AA, AAA, AAAA, C\\n\\n\\n\\n\\n","brand":"Tilta","offers":[{"title":"Default","offer_id":51637715173652,"sku":null,"price":3079.0,"currency_code":"AED","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0965\/6306\/9204\/files\/Tilta-Nucleus-M-Wireless-Lens-Control-System-Partial-Kit-IV.jpg?v=1763325423","url":"https:\/\/awpro.tv\/ar\/products\/tilta-nucleus-m-wireless-lens-control-system-partial-kit-iv","provider":"AWPRO","version":"1.0","type":"link"}